Hi guys so I’ve bought a scott e950 (I think) I fitted tracker and speed box chip but was extremely tight I know seem to have a little play in the crank so I’ve removed the speed chip to take bike back to shop under warranty now I’m wondering if there was an easier way to derestrict my bike I’ve heard about moving speed sensor and putting magnets on peddle arm but cable for the speed sensor goes through frame (inside)
Derestrict scott
- Thread starter Lordlinley
- Start date
tho depending where the sensor is you might have to remove it and do a diy mount for it.
Adapter plate 10 mm
The adapter plate is attached between the rocker and the sensor. It relocates the sensor outwards by 10 mm. We recommend mounting the adapter p…
www.badassebikes.com
My only concern is will I have enough cable as runs inside frame the pops out near rear spindleyou will have to move the sensor back and use one of there adaptor plates and put the magnet on the spokes
Adapthor
The Adapthor is an adapter with which you can mount your badass box with cable ties at any position on the chain stay. Especially suitable is the Ada…
Related Articles
-
MTF Enterprises announces acquisition of EMU Electric Bikes- Started by: Pedelecs
-
Wisper 806T folding bike wins Which? ‘Best Buy’- Started by: Pedelecs
-
Sustrans calls for protected cycle lanes- Started by: Pedelecs
-
Amazon launch their first UK e-cargo micromobility hub- Started by: Pedelecs
