Controllers to buy

[UrbanPuma]

Can anyone recommend a controller to buy for this bike?

Buy a PowaCycle Puma LPX - 16" Wheel - Folding Electric Bike from E-Bikes Direct

The PowaCycle Puma folding electric bike is a lightweight electric bike at only 18kg in total weight, making it easier and more efficient to use as part of your daily life. It uses lithium technology for maximum range.

www.e-bikesdirect.co.uk

Cheers

 

[Nealh]

KT with lcd.

 

[UrbanPuma]

T

KT with lcd.

Thanks Nealh

 

[Nealh]

Buy form Topbike kit or on AliExpress, expect to do carry out some minoe wiring if the connectors don't match or the wire sequence is different.
All quite east to do by direct soldering or using electrical connectors.

 

[UrbanPuma]

Buy form Topbike kit or on AliExpress, expect to do carry out some minoe wiring if the connectors don't match or the wire sequence is different.
All quite east to do by direct soldering or using electrical connectors.

Ok, thank you

 

[WheezyRider]

If you are going to buy a new controller, I suggest getting the Julet cable from the same supplier with it. There are often slight differences between different "Julet" connectors which means they don't always fit nicely together. Another thing to bear in mind is that some controller to LCD connectors are 8 pin and some are 9 pin. The extra pin is for an LED front lamp. The controller might be 8 pin and the cable you have might be 9 pin and if you force the two together, it will not end well

 

[UrbanPuma]

If you are going to buy a new controller, I suggest getting the Julet cable from the same supplier with it. There are often slight differences between different "Julet" connectors which means they don't always fit nicely together. Another thing to bear in mind is that some controller to LCD connectors are 8 pin and some are 9 pin. The extra pin is for an LED front lamp. The controller might be 8 pin and the cable you have might be 9 pin and if you force the two together, it will not end well

Ok, I'd

If you are going to buy a new controller, I suggest getting the Julet cable from the same supplier with it. There are often slight differences between different "Julet" connectors which means they don't always fit nicely together. Another thing to bear in mind is that some controller to LCD connectors are 8 pin and some are 9 pin. The extra pin is for an LED front lamp. The controller might be 8 pin and the cable you have might be 9 pin and if you force the two together, it will not end well

Good to know. Thanks for this extra info WheezyRider