Controller wiring

[mr watts]

Hi,all, just a question if anyone can help.
I have I have a total of five black wires exiting my controller,all of which are ground wires with continuity to each other.
The question is could I join these together and create a common earth point for incoming earth wires on the throttle,cut off etc to minimise connections?
Thanks in advance for any help/advice.

 

[saneagle]

Hi,all, just a question if anyone can help.
I have I have a total of five black wires exiting my controller,all of which are ground wires with continuity to each other.
The question is could I join these together and create a common earth point for incoming earth wires on the throttle,cut off etc to minimise connections?
Thanks in advance for any help/advice.

Yes

 

[Nealh]

Yes .
All of the wire looms that use 1T4 cables etc,etc do exactly this and use the one 5v and Gnd as a common wire supply and split off within in the mould connector.

 

[mr watts]

Yes .
All of the wire looms that use 1T4 cables etc,etc do exactly this and use the one 5v and Gnd as a common wire supply and split off within in the mould connector.

Thanks for your help.
Much appreciated.