Controller LCD-P3C E-bike UrbanGlide C7

[Frederico Vicente]

Good night everyone. Hope you all are well. I have a question and can't find anything on the internet that would help me, so I ask for help.

When I go to the configuration of the controller of my bike, show "- - - - " these dashes, I believe it is to put a password...

Would you know if the password is universal standard or brand-specific?

Here's the photo of the controller...

The model of my bike is;

UrbanGlide E-bike C7

Thanks

 

[vfr400]

The factory one was 3745, but the manufacturer might have put in their own. Please let us know if it works,

 

[Frederico Vicente]

The factory one was 3745, but the manufacturer might have put in their own. Please let us know if it works,

Hello vfr400..

Not work

Underneath the controller is the model I put here and another number that starts with Y/N.

This controller is new, the old controller they used on this electric bike was the S866

 

[vfr400]

I'd try 1234. 1111, 9999, then the 50 numbers from 1954 to 2005, which are the likely birth years of anybosy that set it. After that, anybody's guess, or buy a new controller and LCD. They don't cost much.

 

[Frederico Vicente]

I'd try 1234. 1111, 9999, then the 50 numbers from 1954 to 2005, which are the likely birth years of anybosy that set it. After that, anybody's guess, or buy a new controller and LCD. They don't cost much.

Hi vfr400, thank you..

I going try

 

[eex]

Any luck? Are you holding any button after the password?

 

[Frederico Vicente]

Any luck? Are you holding any button after the password?

Hello.

I haven't had any luck yet, and even the manufacturer hasn't given me a confident answer.

After entering the "password" I hold the power button, which is what I know with the other controllers.

But so far nothing entering the parameters.

 

[fuggymegox]

Hey man, I made this account just to help you out. Try the code 6666. Hope it works!

 

[Frederico Vicente]

Hey man, I made this account just to help you out. Try the code 6666. Hope it works!

Hello man..

I'll try it today when I leave work...

And I inform here if it worked.

Hug

 

[Frederico Vicente]

Back..

And for happiness, that's the code.

Now I can do a better tuning in the parameters.

Thank you very much @fuggymegox.

 

[eex]

Hey man, I made this account just to help you out. Try the code 6666. Hope it works!

It work for me.
Thank you very much @fuggymegox.

 

[Markmol]

It work for me.
Thank you very much @fuggymegox.

Worked for me too!
Thank you @fuggymegox

 

[Markmol]

Back..

And for happiness, that's the code.

Now I can do a better tuning in the parameters.

Thank you very much @fuggymegox.

Hi, I just bought my new E-Bike RKS RSIII PRO. and it has the same controller LCD-P3C, did have any chance to get the user guide of the controller? or how to make the USB slot function?

 

[guerney]

This video seems it might be of use, but there doesn't seem to be any mention of the USB slot function?

 

[Markmol]

This video seems it might be of use, but there doesn't seem to be any mention of the USB slot function?

Thank you for sharing, I have it like the attached photos.

 

[Carlbery]

I think that the usb-port is not intended for customer use. Perhaps it's for factory programming?

 

[Frederico Vicente]

I think that the usb-port is not intended for customer use. Perhaps it's for factory programming?

HI, Carlbery.
I did a test run now and my bike's USB port works.

 

[Carlbery]

Dear Frederico.
Please tell me what do you do with the USB port?

 

[Markmol]

HI, Carlbery.
I did a test run now and my bike's USB port works.

Hi, Frederico ,
Mine isn't working, unfortunately, have you done anything special to get it to work? is it only for charging?

 

[Frederico Vicente]

Dear Frederico.
Please tell me what do you do with the USB port?

HI, Carlbery
At the moment I use it to charge my cell phone or battery-powered signal lights.