Hi,
One of these images is the controller from a recently purchased (used) folding cycle. I was told by the previous owner that he had Pedal Assistance disabled because it
wasn't giving him enough exercise. I'm looking to turn it back on and found the push connectors that had been pulled apart, presumably to disable Pedal
Assistance. I reconnected them but it has made no difference in any of the five levels of assistance. I have attached a photo of the connection which was
pulled apart. It is the black connector on the right side. There is also a throttle which does work.
I was thinking this would most likely be a controller problem but maybe it could be a problem with the Pedal Assistance Sensor? I have attached a photo of what
I'm assuming is the Sensor. Does this look 'normal' to you. Should there also be something on the crank that triggers the Sensor to tell it the bike is moving?
Finally, if I need to replace the controller, is there an obvious replacement because there seem to be an infinite number and none exactly match mine?
Excuse my ignorance but if someone could give me some pointers to work out what's wrong it would be greatly appreciated.
One of these images is the controller from a recently purchased (used) folding cycle. I was told by the previous owner that he had Pedal Assistance disabled because it
wasn't giving him enough exercise. I'm looking to turn it back on and found the push connectors that had been pulled apart, presumably to disable Pedal
Assistance. I reconnected them but it has made no difference in any of the five levels of assistance. I have attached a photo of the connection which was
pulled apart. It is the black connector on the right side. There is also a throttle which does work.
I was thinking this would most likely be a controller problem but maybe it could be a problem with the Pedal Assistance Sensor? I have attached a photo of what
I'm assuming is the Sensor. Does this look 'normal' to you. Should there also be something on the crank that triggers the Sensor to tell it the bike is moving?
Finally, if I need to replace the controller, is there an obvious replacement because there seem to be an infinite number and none exactly match mine?
Excuse my ignorance but if someone could give me some pointers to work out what's wrong it would be greatly appreciated.