hi my controller has a 6 piece of 085r5nt mosfets they are good but when controller heats up controller lost a much power. they Maximum Power Dissipation 160w@25w but its fall 100w@70c can i change them to ncep023n85 with a better cooler? i think about directly install on a scooters chasis for best cooling 
Is there anything I should pay attention to?
Drain-Source Voltage Gate-Source Voltage fits
has lower rds on
much bigger input and output capacitance (085r5nt has 4281 input 669 output vs 14500input 2050output on ncep023n85)
i cant find ncep023's gate resistance but 085 has 1.9ohm Rg
085r5nt
Turn-on Delay Time td(on) - 41 - nS
Turn-on Rise Time tr - 68 - nS
Turn-Off Delay Time td(off) - 164 - nS
Turn-Off Fall Time - 85 - nS
ncep023n85
Turn-on Delay Time td(on) - 41 - nS
Turn-on Rise Time tr - 37 - nS
Turn-Off Delay Time td(off) - 103 - nS
Turn-Off Fall Time - 38 - nS
Is there anything I should pay attention to?
Drain-Source Voltage Gate-Source Voltage fits
has lower rds on
much bigger input and output capacitance (085r5nt has 4281 input 669 output vs 14500input 2050output on ncep023n85)
i cant find ncep023's gate resistance but 085 has 1.9ohm Rg
085r5nt
Turn-on Delay Time td(on) - 41 - nS
Turn-on Rise Time tr - 68 - nS
Turn-Off Delay Time td(off) - 164 - nS
Turn-Off Fall Time - 85 - nS
ncep023n85
Turn-on Delay Time td(on) - 41 - nS
Turn-on Rise Time tr - 37 - nS
Turn-Off Delay Time td(off) - 103 - nS
Turn-Off Fall Time - 38 - nS
