Wanted Chainring Adapter or Bling Ring

[wheeliepete]

Hi all
Bit of a long shot, but has anyone got an unwanted PreciAlps or Luna 130bcd chainring adapter for a bbshd collecting dust? Alteratively, a 36 tooth Bling Ring for same may also do the job. I'm fitting a Rohloff Speedhub to my bike and now the chainline needs to move around 10mm outboard.

 

[peter.c]

I will look in the garage tomorrow I have a couple of chainring adaptors , but I think they might be flat steel ones
The 36 lekkie is flat no dish at all have one fitted on the trike

 

[wheeliepete]

Thanks Pete, i've ordered one of these cheap bafang ones, should do the job, but might need to resort to grinder for a little fine adjustment.

Pardon our interruption...

 

[trevor brooker]

Thanks Pete, i've ordered one of these cheap bafang ones, should do the job, but might need to resort to grinder for a little fine adjustment.

Please let us know if this is successful in moving the chain line out

 

[peter.c]

My one come from a seller in Holland cheap did not space out enough ended up with a lekkie 42

 

[wheeliepete]

Please let us know if this is successful in moving the chain line out

So, after much messing about I've ended up with a decent chain line using my existing 42T Bling Ring with 3 x 2mm spacers and some adjustment to my BB spacers.

Lekkie spacer for Bling Ring HD

2mm spacers for Lekkie Bling Ring HD chain rings to aid fitting and chain alignment.

www.brightonebikes.co.uk

The Bafang chainring adapter pulled the chain line out way too far, so it was not the solution I hoped for. I should mention that my bike runs 100mm wide rims with 120mm tyres, so made this job a little more difficult. I think the adapter could be a good choice on a more conventional bike when fitting a IGH.