Building Controller to Fit in Seat Post

[shawn rosenthal]

I'd like to fit the controller inside the seatpost which throws out anything commercial I've seen (asides from the external keyde square wave controller).

Does anyone have advice of where to find info on how to make a controller that uses torque input for PAS?

Thanks ahead, Shawn

 

[Deleted member 4366]

When I was at the last Shanghai show, there was a company showing tint controllers. I took one of their brochures. I was looking at it at Xmas, but then I chucked it out.
Here's a photo. It's smaller than it looks in the photo. You could take out the PCB and use a strip heatsink rather than a box to make it even smaller:

 

[trex]

Lishui make one for the seat tube, here it is:

 

[shawn rosenthal]

When I was at the last Shanghai show, there was a company showing tint controllers. I took one of their brochures. I was looking at it at Xmas, but then I chucked it out.
Here's a photo. It's smaller than it looks in the photo. You could take out the PCB and use a strip heatsink rather than a box to make it even smaller:

Thanks. Something told me I'd hear from you, d8veh, you're all over the forums offering the technical help. I wonder if the unit would fit inside a 31mm ID seatpost when removed from the alloy shell.

 

[shawn rosenthal]

Lishui make one for the seat tube, here it is:

Do you know where I can find the supplier for this? I wasn't able to find it within wooshbikes

 

[trex]

it was on their hubkits page last year. I suggest you leave a message on Lishui website
http://www.lsdzs.net/

 

[shemozzle999]

Do you know where I can find the supplier for this? I wasn't able to find it within wooshbikes

http://lishuicontroller.en.made-in-china.com/product/hSOxUkgHCiVD/China-High-Quality-Lsw-Pump-Ebike-Controller-with-CE.html

 

[patpatbut]

When I was at the last Shanghai show, there was a company showing tint controllers. I took one of their brochures. I was looking at it at Xmas, but then I chucked it out.
Here's a photo. It's smaller than it looks in the photo. You could take out the PCB and use a strip heatsink rather than a box to make it even smaller:

Where can we get this controller?

Thanks

 

[Deleted member 4366]

I'm not sure. I've chucked the broschure now.

 

[shawn rosenthal]

Thanks. Sent a message to the Lishui distributor. I'll keep you guys posted on how it goes.