Hi. i'm having a issue with my speed reading on Bosch performance cx line.
While crusing on stable speeds let say 25 km/h my Purion is showing 12 kmh and then back to 25 km/h. 3 months ago motor has been replace due error 500 under warranty. After 400KM i had error 504 and then cleared it self, later it was arund 1200km and again same thing, Im not sure if those 2 things are connected to each other but this is getting me worried. I tried to adjust the magnet but no luck as well. Anyhone have an idea what it might cause that issue? I think it could be the sensor it self.
Thank you.
While crusing on stable speeds let say 25 km/h my Purion is showing 12 kmh and then back to 25 km/h. 3 months ago motor has been replace due error 500 under warranty. After 400KM i had error 504 and then cleared it self, later it was arund 1200km and again same thing, Im not sure if those 2 things are connected to each other but this is getting me worried. I tried to adjust the magnet but no luck as well. Anyhone have an idea what it might cause that issue? I think it could be the sensor it self.
Thank you.
Last edited: