BBS02 Bottom Bracket Tool

[culy30]

Does anyone have any advice regarding torquing up the inner lockring on a BBS02? The one with the 4 notches on the LH side. I have several BB tools inc older hook, external type but none fit properly. I'm concerned it will loosen off. (Fitted to a 73mm BB so I can only use the single lock ring.) The best I've managed so far is with a chain wrench that I use for cassette removal. I'm happy to buy another tool, preferably with a 3/8 or 1/2 drice so I can use my torque wrench. I dont want to get the club hammer and drift to it! Does anyone use/recommend locktite or similar on this?

 

[tommie]

I used that hook tool as used in this video --->

 

[culy30]

Thanks Tommie, I have a couple of those tools but they dont quite fit properly, mine are for too big a diameter. The "hook" slips out of the slot. Is yours stamped with a make/size?

 

[tommie]

It was in this kit i bought to install the BBS02, the hook part is on a swivel if you know what i mean

http://www.ebay.co.uk/itm/Bike-Cycling-Bicycle-Maintenance-Repair-Hand-Wrench-Tool-Kit-Box-Case-44PCS-N6G2-/141940509783?hash=item210c504c57:g:t1oAAOSwJQdW9RuD