BBS Display

[dbar]

I have just replaced the old C950 display on my 500W 36V BBS powered bikewith a C965 Display. I have set it to 5 levels of PAS. It has no throttle response in PAS 0 and only gives thottle up to the other PAS levels. I would like to have 100% throttle in all pas levels like I have on my 750W powered bike. Is this possible going through the display or will I need to re-programe with a cable and software? Any advice welcome.
Cheers

 

[trex]

you will have to reprogram the LCD.

 

[dbar]

I thought that i would have to. Is it hard and what will I need to do it?

 

[Kinninvie]

Just read the 39 pages at this link and you will know everything you need to.
https://endless-sphere.com/forums/viewtopic.php?f=28&t=58780&hilit=bbs02

 

[dbar]

Well I'd better get on with it then.

 

[dbar]

I've ordered a programming cable. Is there anyone that has any tips on programming a 36v 500w bbs.