Bafang kit on Big Slick Roux DeRestrict

[Lance01]

Hi,
I have a HMI namely, DP E06.U 9.2. This is similar to DP E06.UART on Bafang's website. https://www.bafang-e.com/en/components/component/hmi/dp-e06uart.html

I have a BFSWX02 36V250W (13) 27.5-1703210553-6 rear hub motor with disc brake.

I have a Bafang Controller for a brushless motor. This is similar to this: https://www.bafang-e.com/en/components/component/controller/cr-s105250sq.html

The actual specifics for the controller are:
Rated voltage=36v
Software no. CRS1053613E010118.1
Drawing No.886-61-504

This is on the Big Slick Roux 2018 hybrid mountain bike.


I would like to derestrict this limit of 25km/h to ride at about 30-32 km/h on private land. What would you advise would be the best ways of doing this?
I really appreciate your time in replying.
Thanks very much

 

[Fat Rat]

Hi welcome

You would have more luck in the diy threads than in introductions as not everyone looks in here as much

Hope you find what your looking for

 

[Lance01]

Thanks for the advice, I will move it. Cheers