3 pin connectors

[Alan Quay]

Hi all,

I'm looking to add a connector on to the phase wires, close to the hub to make wheel removal easier. It needs to be water resistant (ish) and capable of 15-20 amps.

What have others used?

 

[Deleted member 4366]

Does it have hall sensor wires too?

 

[Alan Quay]

No, just 3 pin is all I'm after.

 

[Deleted member 4366]

Shemozzle had some a while ago. I don't know if he has any left. You can still use the 9-pin one and just connect the three phase wires:
https://bmsbattery.com/ebike-parts/439-a-pair-of-9pin-waterproof-male-female-connector-cable-for-motor-parts.html

 

[Alan Quay]

Thanks d8veh and Shemozzle, but I'm really after something that I can retro fit (don't want to take the motor apart)

I will have a look and see what RS have got.

 

[shemozzle999]

If you want something solderable check out this:

http://www.ebay.com.au/itm/MT60-3-PIN-MOTOR-ESC-CONNECTOR-IN-BLACK-TRAXXAS-DEANS-XT60-ACCUCEL-6-IMAX-B6AC-/281532810053


http://makeitbuildit.co.uk/index.php?route=product/product&product_id=373


http://www.amazon.co.uk/Xgeek-Light-weight-connection-Connector/dp/B00Y3BGPPG

https://www.hobbyking.co.uk/hobbyking/store/__66803__MT60_3_Pole_Motor_ESC_Connector_Set_12AWG_Black_Male_Female_2_set_.html

 

[Deleted member 4366]

Thanks d8veh and Shemozzle, but I'm really after something that I can retro fit (don't want to take the motor apart)

I will have a look and see what RS have got.

You don't have to open the motor. You justsoldr the wires together outside the motor, which you have to do with any connector.