Search results

All working great thanks Was a bit surprised no damage to contoller. Will block off the hole in the frame where the brake wires goes in, bike had no mudguards

Just fixed my bike, drilled out the key lock, removed the controller and found that 2 of the 3 phase motor wires had shorted out ( due to water getting into the frame in the hole for the brake wires) That was causing the zero LED on the display to flash on and off, stopping the bike from...

That's a great list of tests to do, thanks alot. As the bike came without a key for the battery, some how i need to remove the battery to get to the controller. This type of bike doesn't have a twist throttle just push buttons for the PAS I'm sure there must be loads of people having had...

Hi THe brake cables have disconnects, tested both brakes with a ohm meter, both open circuit when brake not applied, and closed circuit when brake applied . Good point though

The error codes may help someone else, they are for aTS19-R LED display which has the 4 LEDS eco 1 2 3 , not mine that just has 0 1 2 3 on the display

Thanks for the replys The controller 0 led is flashing on and off about once a second. battery charged , all connections have been checked etc

Hi everbody Just bought a swifty e bike for my daughter from an auction site, broke my first rule, check it out first !! It's a swifty AT656 and the error code that is coming up on the controller is the no 0 led flashing on and off. The led are 0 to 3 indicating the level of assist you requre...