Search results

Hi Thanks for your help once again Regards Ian

Hi Can anyone offer some advice please,i have bought a yose power conversion kit.The rear wheel hasn't come with a brake disc or rear sprocket.I've sorted the brake disc but unsure about cassette, the reason being is that there's a thread around 38mm -40mm and wanted to know which type of...

Morning Raboa Thanks for sending these,can you remove crank arms individually only i want to remove non drive one just to fit a pas Regards Ian

Hi Saneagle On hand again to help me,thank you once again Regards Ian

Evening Sturmey I'm pretty sure i know what you mean, so just need to put something inside for the centre part of crank extractor to push against when tightening it and this will then release the crank Thanks

Hi everyone I am fitting a conversion kit to a specialized hardrock, came to fit the pas sensor and tried to remove the crank.Have a crank extractor which outer part screwed in fine then screwed inner part in but it just bottomed out.Looked through the crank but hollow. Do you have to have a...

Morning Saneagle Yes that makes total sense,why would i need connection box if both were soldered together.Thick head i am. Thank you Ian

Hi Saneagle The yellow connectors actually plug into each other as in photo,do i still need to cut the one connector on battery holder off. Thanks

Evening I have bought a e bike conversion kit,all plugs for throttle,lcd,brake leavers and pas plugs match up with each other.Have come to match battery up with the black and red connections on ecu but as in photo connections on battery holder have plugs but on ecu they have a fixed connection...

Morning Saneagle Theres a short sensor cable from ecu(this is one that looks squashed)then have other one that plugs into this and fits to crank,i have two and tried both Thanks Ian

Hi Saneagle Thank you,i have replaced display, ecu, crank sensor and rear motor,am getting 41.3v out of 36v battery so only thing it could be is this cable i think.Would have to cut possible bad bit out and reconnect.Is there an easy way of re-connecting cables back together Thank yo Ian

Hi all I took my carrera vengeance e spec bike into an independent bike shop recently after losing faith in Halfords after countless visits.Anyway i was told the problem was an intermittent crank sensor.I'm not getting pedal assist but when i turn bike upside down and turn pedals i can hear rear...

Hi does anyone know whether a ebhm20 rear motor will work the same as an ebhm19 on carrera vengeance e bike.Its same plug connection but not sure if compatible Thank you

Hi Thank you,i'll seriously look in to woosh bike Regards Ian

I am 75kg, been looking at haibike, trek powerfly and specialized.Any others i should consider

Making me dizzy watching that

On the pin quantitie your bang on there is 9,just counted them

I just want something decent to get to work and back really,was told to look at ones around 80-85 torque.Would that be right and what would you suggest in this field Thanks

Hi I just took the 6 bolts out and the motor came out in one as in photo,as regards the connector plug it as 3 big pins with 5 smaller pins below and 3 smaller pins above Thanks Ps as you are an avid biker what are good electric mountain bikes to buy Regards Ian

Hi From what you have said and me trying these things i think motor has packed up.Thanm you for your help. Regards Ian