Search results

Worth a try before I spend anymore money lol Cheers

O Ok cheers not sure if it's all scrap anyway lol as the motor doesn't seem to test out

I've just put the meteron to test the phase wires and have no resistance or continuity across all 3 ?

Great, are these available in the UK or from China?

ive heard mention of controllers from topbikekit.com??

ok thanks for the reply...what would you recommend for controller, a voilamart or something else ...

ok so when i got the kit there was a a bit of cable damage on the spindle and the cable had been taped up..i removed and found the yellow hall sensor wire was broken so i split the motor, found some moisture inside, cleaned everything, shortened the cable a little then re soldered all of the...

thanks for the link i have printed it off and will have a test later to what that shows regards andrew

hi nealh, when i tested each sensor they would fluctuate between 5 and probably 2 volts as the wheel was turning on each sensor wire ?

I've tried all of that but still no output just the lcd display on the throttle

Thanks for the reply....I've tried that but nothing from it ..the screen lights up on the throttle control and shows power but nothing to the motor

The motor had some moisture in it but no real damage etc Is there a way of testing the motor without the controller?

Hi all new here Looking for some advice on a cheap violamart conversion kit to test the water I purchase a second user kit on ebay to try building a bike that was the first mistake as the wires were shot....all mended now but nothing from the motor...throttle kit shows power but nothing from...