Search results

Thanks for that. I managed to pry the controller open and can't find any fuses. So I guess that's it. I looked at Pswpower but they don't do one in 36v 250w brushed. I have ordered another from ALI in China but eta is 4th March. Just have to wait and be more careful next time!

Only in the power pack and that fuse is OK. There may be one in the controller if I can get it apart but it's not screwed together just plastic welded.

I am installing a new Chinese controller (36v 250W) in my old Powabyke Shopper. I had it all wired up (loosely connected) and going but foolishly let the wire from the controller which acts as the ignition switch (blue wire) short against the earth wire from the battery. I am not sure that this...

I have found the problem. The problem was the wiring on the throttle which did not match the wiring on the controller. Not been too far, only a test ride but it works fine not bad for £15. Only time will tell.

Thanks vfr400. I don't understand the overloaded bit because I haven't even connected the motor output side except to a meter, but I suppose I have the option of returning it to the Ebay seller. I am not surprised, it was extremely cheap (£15 for both controller and throttle) but worth a try. I...

Hi I have accumulated over the years 4 POWABYKES 2 Euros and 2 Shoppers. All 36v brushed motor types. Recently both my shoppers showed duff PCB (using self testing tool) admittedly one was being used for spares/repair so I wasn't surprised. A bit difficult to get hold of so I opted for replacing...