Search results

Cheers for all your help. I have ordered the parts so will see how we get on.

Perfect that sounds great but do you think I could source the parts in the UK

Yea I contacted them and they have offered me to return it but I live in Jersey and it was a nightmare getting here and they will only cover postage from the UK to Germany so I'd rather repair it and keep it. I'm not bothered about the lights and horn as I can get clip lights and a bell which is...

Hi i have worked out all the wires and added pics i hope this makes more sense: red/black=brake lever lights red/black/blue=horn+lights on/off switch red/black/green=front light yellow=battery red/black/brown=pas sensor red/black/green/yellow=brake light blue/green/yellow=motor...

The 1st pic is the motor cables, 2nd pic is brake lights and pas i think, 3rd pic is battery and something else, 4th pic is lcd connection. i have no idea what the others are.

So I'm getting 1.5v on the motor cables 1.25 on the Pas 1.5 on the LCD 0 on the horn. If it's possible to install a complete new setup I think would be easier. The motor is 10a 350w 36v if that's any use.

Ok I'll grab pics and label as best I can. With the lights there is 2 cables running from each brake which activates the rear light.

Ok I'll test it tonight and let you know the result.

Ok so i think im keen to try a complete new electrics kit. Can you recommend anything that would be suitable for this bike as it has lights, horn and brake lights all built in. im not bothered about the horn or the 3 speed settings i just want the thing to run and be able to see how much battery...

So I've tried the new throttle and no luck. The bike is in bits and will soon be going to the dump. I'll be investing in a reputable bike as I have learned my lesson about cheap Chinese rip offs with there horrendous wiring Thank you for your help with this.

Ill try the new one when it arrives and let you know how I get on. My guess would be the lcd has gone as the voltage is so low on the red cable.

I've just about given up on this and ordered a complete new throttle lcd. I appreciate your help but other than replacing the LCD I'm completely lost. The only problem with the new one is that it does not have the blue wire in the middle of the red and black and is a push button rather than a...

Its showing 1.14

So I've done a few tests I think I done it right. It's showing throttle 1.14v Pas 6.25v and hall 3.79v I'm not 100 percent as these wires are crazy confusing.

Ok I will grab a meter tomorrow and try the test and let you know the readings.

I haven't ridden in the rain as I'm not sure how waterproof it is. Do you think it will be easy enough to replace the LCD throttle with a different one or would it need to be the same? I was thinking if I did need to replace it would it be possible to use one with a push button rather than a...

So basically I was out for a ride, got home then turned it off. I turned it on the next day to go to work and the error just appeared for no reason at all. It was fine for the first 2 weeks or so. There are 8 settings in the menu which I have not altered at all i.e. voltage is set to 36 and...

Hi, I'm not sure if I'm posting in the right place but I'm in desperate need of some help with an error I'm receiving on my new ebike. Basically I bought this folding bike about a month ago and all was great until a few weeks ago I started getting error 10 on the screen and have no power or...