Search results

If you can see the photos I posted today, what more do you want to see. It shows the motor being taken out of the hub?

I posted photos from the owners manual earlier in the thread to show the motor Attached here if this didn't work before

Finally got a pair of resistors and checked this solution, but still no control

Nealh Thanks for the reply, the controller is marked as PDQ-0031C. I have spoken to Steve at 4QD, who suggested dropping the controller output voltage using zener diode / resistor pair

Anyone got any suggestions please

Also a photo of the throttle from the repair manual

Sorry about that, do the images from the repair manual give you information?

I have measured between red and black reading jumps from -180 mV to + 180mV white and red reading also jumps on mV scale black and white = -9V DC constant The square block is just a cover for the connector I will have a look at the suggestions Thanks Nick

Thanks for the reply, I stripped the old throttle cable when I was checking the output voltage. Photo of the connector is below. I have also attached a photo of the controller and new throttle.

Hi I have a trike controller which recently stopped responding to the throttle. I ordered a 'universal' replacement from Amazon but when I connect this the motor starts immediately and the throttle has no effect. I have tested the wiring from the controller and get 9V across black +ve and...