Search results

Hi This screen is a laptop computer program? I think I can get all this from the display. I don't have the colour display but the basic one. I have to acquaint myself with it again and learn how to access all of this info. Now I know the output of the battery I will be better informed. Thanks...

Hi I managed to charge the low cells to 4.08V with a phone charger. Took the bike out today went for 2 hours gave it some heavy work loads. No cut outs at all so good news. Will try it tomorrow thanks for all the help. I would like to ask a question do I charge the battery to the maximum or do...

Yes bike works a lot better did about 6 miles then started to cut out again as you say need a charger to bring the low cells up. Still a lot better I guess there are dodgy cells amongst that group will have to learn to change them. Thanks a lot for your help. All the best Perry

After 2:45 hours it reads 53.2. I will try it on the bike and see what happens. It was fully on the previous charger voltage at 49.6V. Measutre charger again it is 54.5-6V now. I guess a few charges at the new level will reset the battery I hope. I have to put the bike together will let you...

Hi again Trimmed the pot and got it upto 54.5 maximum surprisingly there is a sweet spot on the pot. Keep on turning it clockwise did not increase the voltage. Anyway success so far will charge the battery again see what happens. Then test at the terminals again.

Thanks for this it is well above and beyond my expectation. Looks as if I have a bit of work to do. So an old phone charger USB type thing 5V. The rest of the charger is covered with a heat sink but I guess I could take that off but have not got and heatsink compound so I am guessing you will...

Thanks for the help this is amazing I have narrowed one cell bank to only 3.3V the rest are measuring between 3.7 to 3.8V. I have measured the charger and that only reads 49.6 Volts even though the output voltage on the charger is rated at 54.6V does it change with load or is there an...

The battery is fully charged at 49.4V They are in banks of 10 5 The Voltage is 49.4Volts It looks if there is an imbalance as you say each battery is 2500 mAh 6 banks of 10 5 in parallel plus 5 in parallel so discharge max is 32.5A is that right? school boy physics.

OK will charge fully but I think from memory it was never that much over 48V. Forgive me for asking a dumb question what do you mean when you say the batteries recharge rate do I measure that? Is it on the batteries themselves? They are 18650 2500mAh 3.6/4.2V Thanks for such a quick reply am...

Hi The battery cuts out when power is applied after a few seconds, checked voltage it is 48.3 Volts after abut 3/4 hour charge. Connected the charger to the bike directly to the charger to eliminate faults with the motor and controller. Also had a look at the wiring to the controller all OK...