Search results

How about these forks ? Will they fit . https://www.ebay.co.uk/itm/26-inch-Zoom-Hydraulic-Suspension-Fork-1-210mm-Threaded-Steerer/263789965140?hash=item3d6b1b6f54:g:RwkAAOSwqWNbQAFf

What about these forks will they fit? Hope the link works. https://www.ebay.co.uk/itm/26-inch-Zoom-Hydraulic-Suspension-Fork-1-210mm-Threaded-Steerer/263789965140?hash=item3d6b1b6f54:g:RwkAAOSwqWNbQAFf

I have a Raleigh Array with solid touring fork , on a rough cycle track the bike is very bouncy on the front end giving me pain in my elbows . That's partially why I changed the bike for a big bear . But the forks as they are are just the same as the solid fork. They are not bottoming out ...

Great thanks I will.

What do I need to look for in a replacement fork , size etc ,are the front forks a standard fit ,or are they all different sizes.

Hi the front forks on my big bear are the top gun type , there is movement in them ,up and down but when moving on a rough surface the forks are solid ,thus thus no suspension. Can someone tell me if there is any adjustment in them, and if so how to adjust them. If not can anybody recommend what...

Thanks for all of your help on this ,you have helped a lot. Finally got to the bottom of the noise , I striped the motor again and found that the 2 centre bearing had gone ,they were noisy and rough. Got all 4 bearings form simplybearings near me at a cost of £36 the lot .motor now ok.

Thanks very much ,one on order.

Can someone tell me what type of bottom bracket is fitted in the big bear . Model number ,size ect. Thanks.

Just baught used whoosh big bear , I want to increase the size of the front crank on the bike to keep in contact with the gears to stop spinning out. Has anyone done this ?can anyone recommend a suitable crank ? I was thinking of increasing to 48teeth will this be ok. Also been looking at a...

Thanks for all your replys. I will check that bearing on the side plate when I do the gears. Can you please tell me where you got the parts from?

Removed the front wheel , and dismantled the motor. All looks well inside of the motor, no teeth missing, no evidence of scouering or rubbing marks. I am going to order a set of 3 gears then I no it's good. Just done about 20 miles on the bike and the noise hasn't gone any worse.

Ok will do if I can.

Hi Just baught a second hand big bear ,the bike is in very good condition . Been on a test ride this afternoon of about 2 miles , all is well with the bike , exept the motor is very noisy , it sounds like an old powabyke euro I had. The bike freewheels nicely and is very quiet until the motor...

Hi Towing a trailer is brilliant I use one for my fishing gear ,I do about 8 miles each way when I go fishing and you don't really notice the trailer . I bought it cheap gumtree as a double child trailer ,remove all of the material and then make a bed with webbing and old seat belt webbing. You...

Thanks for your reply's all sorted now both batteries charging well.

Hi Can someone give me a bit of info on wiring balance wires please. I am fitting them to an 7S3P battery 18650 cells , I have been reading online on how to wire them and I am now confused. The below balance socket fits into the charger with the black wire on the left, should this go to the...

Yes I think my motor is a brushed one it has 2 wire's comming from it.

Thank you for your reply d8veh , firstly would those batteries be ok ,or would you go higher on the AH . Secondly would you please recommend the gear that I should buy for the bike ,I wouldn't have a clue on what to buy. As for the fitting of the electrical side I have a friend how will help me...