Search results

it cuts out randomly even when not moving , to power back on i have to disconnect switch from display unit and then it powers back up, i'm thinking maybe a faulty switch ?

hi all , have a problem with my bafang kit the display keeps cutting off and won't come back on again unless i unplug it checked all connections all good any suggestions ?

ok thanks guys

hi wonder if anyone has a midrive fitted with a quick release wheel at the rear want to travel with bike next week and want to swap out bolt on wheel with Qr so i can remove easy for train not sure about strength of quick release v bolt on with midrive have the Bafang 500w kit fitted so quite a...

ok thanks I'll email order

Ok thanks sounds good ,the weight of the battery means i could carry it easy in a pannier I can order the bike but i can't see the battery listed in your online shop how do i go about ordering this?

the easy solution would be to buy an additional battery with the bike so i could just swap over , do you have batteries additional batteries to buy?

I was looking at this bike and would had bought it the only drawback for me was the battery i want a greater range, i have 3 batteries which are which are 20-21aH I bought a couple of mid-drives and a big bear kit from you last year and was hoping to unitize one of those . Is the battery on this...

i was thinking of rack mounting it or maybe if room mounting it on the crossbar a have a 21ah dolphin battery that jimmy made for me , although the one he has made for your bike looks nice and compact in that bag

this is the bike i had in mind

Hi all wondering if anyone has had any experience converting a folding mountain bike using a Bafang mid drive motor kit ,looking at building one to take touring around Cornwall any info/advise appreciated

the battery pack is 36v ,the full charge voltage is 38,2 v and in my opinion this is wrong in full discharge state voltage is 32.4v peaks amps drawn during test was 19-20amps the battery pack consists of Ncm pouch packs which are normally used in the electric car industry

hi all I'm wondering if anyone has experienced the problem I'm having with my Bafang bbs02 kit ,i fitted this kit a few weeks ago and have been using it along with my Ping 36v 15ah lifepo4 batteries with no problems at all as these batteries are coming towards the end of there service life (4...

ok great thanks

anyone know of a reliable uk seller for these kits?

I wonder if anyone has had any experience with the bafang central motor kits? i'm currently using a front bpm 350w with 22A contoller which is used off road for towing a trailer around a wildlife park with very steep pathways/lanes, looking at the spec on the cental motors the torque is much...

INFORMATION IS TAKEN FROM CONTROLLER LABEL IT SAYS POWER - 450W ,OVERCURRENT 17A WHICH I FOUND ODD I'VE OPENED UP THE CONTROLLER TO EXPLORE SOLDERING IT BUT THERE IS NO ROOM BELIEVE YOU ME IT IS TIGHT THEY HAVE SOLDERED WIRES SO CLOSE TO IT THEY ALMOST MAKE CONTACT WITH THE SHUNT I HAVE NEVER...

kit is 36v 350w BPM (216) rear driving on a 26" wheel battery is 15ah ping

hi all i am hoping someone can throw some light on an issue i have with my Bpm kit i just finished fitting it yesterday and have taken it for a test ride today , how disappointed i am there seems to be very little difference between my 8Fun motor and the Bpm motor on the hill climbing on closer...