Search results

Hi Nealh Road Test Results. Firstly I had to change the PAS sensor as I failed to get a good enough mounting for the sensor and it kept slipping, I ordered and fitted the KT-V12L sensor tested everything setup GPS and off around the block. I set the gear shift to the second lowest cog at the...

Hi Nealh Great information I thank you most sincerely for all the help, I will stup GPS and do a speed test Saturday as you suggested, I will then carry out the tests with bike on stand and let you know the speeds generated with no load, I am very pleased and its been a great learning curve. I...

Hi Nealh The first thing I did was to setup the PAS and magnets as suggested, I have done a very tempory job of fixing the sensor to the frame and set it to 1mm or maybe a bit closer a credit card fits with a bit of a push between magnets and sensor. Next disconnected all leads except 9 pin to...

Hi Nealh thanks for that reply I will sort the PAS as recommended plus the P1 and let you know Thanks Phill

Tested each wire for continuity to the 9 pin plug that goes to the motor they are all ok so continued with the following check. I have checked the voltages as per halls test document you recommended to another user with same problem I have tested the connections to the multiplug all ok...

Hi yes I have a multimeter I will also check all the connections today

Hi Set display to P 1 it reads 87 turned peddles backwards it made no difference. if I hold the throttle switch down and pull the bike a few inches back the motor grunts and tries to move the bike forward, if i lift it up quick enough the back wheel spins in the right direction. On the road test...

Hi All, can anyone help? I am a newbie to this ebike stuff but needed to install thumb throttle for help in my old age.......I have read the threads about converting my Carrera ebike to have a throttle, I bought the Kit consisting of controller, PAS, Throttle and LCD5 fitted to the bike wire to...