Search results

Thanks. I guess it is the same as KU65 but with nice LCD display then. Pat

Have you check the voltage out from your charger using voltmeter?

Thanks Dave. Btw, Is your LCD controller working on 48? Pat

On flat 18pmh max. I thought s12s is 23a so it might give a little boost I got this motor from GBK http://www.greenbikekit.com/bafang-cst-bldc-motor.html

Hi Dave My s06s is sensor mode only which only works with hall connection. Maybe you mean s06p? Also, I thought q100 320rpm supports sensorless mode. Pat

I want to gain some speed for my bafang cst 250w would than help if I switch the controller to s12s? Pat

BMS in the battery shut off possibly. Try to charge it overnight to see if it helps. If not, you might need to open the battery case to check each cell. How old is the battery btw? Pat

Any update about this controller? Pat

Hi Dave, Would you be able to tell me the differences between S06S, KU65 and the one you sell here? Thanks Pat

That is correct. Dave. If the motor is too big, there is a big problem when you fold down the handle bar. If you are using S type maybe you can get away from it. My brompton is SWXB front motor and it takes a lot adjustment to make the brompton fold perfectly. Pat

Thanks Dave, Let me try the P5 setting to see what happen then. Pat

Thanks Dave I migrated the s06s from my 26 swxh motor to this motor. I did no remember there is a voltage sage. The main difference i feel that the bafang cst draws a lot more power than swxh ( the battery level bar drops in 5 miles instead of 10) If I can monitor the watt carefully would I...

Yes ku65 but I do not want swap it until this is the last resort. Will I be able to see on watt meter If there is a voltage sage? Pat

I am using BPM size one cst using s06s controller so 15 amps I think. The battery is 36v 12ah liftpo4 battery from BMSbattery it should be capable to draw 2C and 3C max. The power does not cut off completely and I can't see anything change on the LCD. Also I am using the HWBS and I doubt it is...

Hi all, I have finally finished my build using Bafang CST 36 250w (205 rpm on 26inch version) on my hybrid bike (700c) and it runs around 18mph with pedalling. The problem I am having now is occasionally there is a voltage sag (lose power for like half sec) I am not sure if it is the PAS (12...

Hi Dave, Front one from GBK would be nice. Does it come with waterproof connector and hall connection? Pat

Hi all, Anyone has a spare of this motor knocking around? (Forgot to say I need to front version with waterproof hall sensor connection) I will buy it for a good price as I do not need it urgently :) just want it for a backup Pat

Hi Dave Would you consider the 27.5" level? Pat

Can you tell me what plugs you have connected? Photo would be nice. This controller works on sensor mode only so make sure you connect the hall wires Pat

Can you tell me what plugs you have connected? Photo would be nice. This controller works on sensor mode only so make sure you connect the hall wires Pat