Search results

Any details about this setup? I am sure I have seen this motor around here before Pat

I have S06S controller and I am able to fit all the connectors (including hall) and cables in the small controller case from BMSbattery. Yes it is very busy and you need to press it hard to close the case but it is dorable. The main part is to replace most of the connectors with JST one. You...

Yes that looks good to me Would you mind to give us a shopping list before you go ahead? Pat

Yes you are right if you are using the same controller. One thing to add bafang CST uses much better component than BPM so for long term it is better Pat

The cheap bike option you just added would lose that acceleration ability you planned at the beginning The torque arm from John is essential for high torque setup. I got it from him and it is a very good quality stuff Pat

I see. This setup should do nicely in term of acceleration ( 29amp ). For the choice of the bike, it would definitely easier with the bike (rockrider 5.1 in this case) that has bike rack mount It means u would lose the disc brake and I do think this is quite important for your case(high...

Your response is quick lol For ebrake, if you are using twist grip throttle you might accidentally trigger it when you try to grip the handle bar. Not a problem if you use thumb throttle Also it seems using it would reduce the wear of the brake Of course the main concern is sticky throttle...

Good to know you want to start the build Consider this easy kit http://www.bmsbattery.com/controller/649-s06-250w-imitation-torque-square-wave-controller.html Hiding colourfully cables helps the stealthiness The cst kit from Dave is good if you are not confident about wheel build I know...

I have read someone in this forum has tried the 48v version and it seems to fit the bill. Pat

I have the headlight and a buzzer...I might try to do a bit of experiment with it. Wish the summer is here now Pat

Does anyone know how to link the wire to the controller? http://www.bmsbattery.com/665-ebike-speaker-and-headlight-button.html Pat

nice design but how much? :)

I think you just had a bad day. I am sure you will get better day by day about commuting. I hate using google map for bike sat nav as it is not sensitive enough and it makes me losing concentration. Pat

I have a SWXB clone motor running 340RPM at 36v. The loaded speed is about 17mph (39v nominal) on my brompton. hope it helps Pat

little help http://www.ebay.co.uk/itm/2014-Model-48V-10-4ah-bottle-holdermount-lithium-Li-ion-electric-bike-battery-/141198150930?pt=UK_Bikes_GL&hash=item20e010cd12

You need the bafang motor removal tool. You can find that from GBK site Pat

The question is where you are going to mount the battery on your bike? This battery is for specific bike that has a place (behind the seat post tube) to install. It wont fit the bike triangle area as it is very long and also needs more length of the frame to slide it out. For your second...

Good to know you guys can get the advantage of it :D Hope I could see more ebikes on the street :) Pat

Wow you are up early. Can't wait to get your bike out today? :) Pat

Three is good enough but 6 helps you when you are out of juice. The 2 speed shifter at the left handbar limits you to have a LCD there. For me I prefer 3 I recommend to get a M version as you can fit more gadgets if u need later on Pat