Search results

Plenty of room in the rear for much wider tyre, 650b rims ,think the front is 1,1/8 fork unit again easy to upgrade and plenty of room for wider rim in std forks which are a little on the soft side.

Speed restriction is removed by entering passcode 0512 and going into sub menu, You may want to get programming cable and software, to up the keep current settings from 30% to around 60% , my controller is 25a set at 20a way more than battery is capable of supplying,that's why my above post is...

Where do you guys recommend to get a quality battery 36v 17ah 25a continuous discharge. Downtube fitting same as the one on the bike.

Mmmmmm! Me likey!

I contacted Ewan Maxwell Emax bikes in Australia where the Emax max drive bike that Bruno did his eloquent "POWER" review on, and asked a few questions regarding our greenway bikes, His answers were 1 it will not work with 48hr battery and 48v is not necessary for this motor 2 he carries all...

Max drive is lovely motor, silent , when u mod it to really see how it goes u will want one, battery easy to swap out for 17ah so massive range , which you will have to do as sag is massive once the restriction is removed and you use the power, , it's also not the G33.250 but is a G33.350 on...

Getting on a bike after so long you are used to faster speeds along roads so you are running motor flat out,and on hills you might not be in the most efficient gear for distance, you'll get used to it , or carry a spare battery if you find one at a decent price.

That was a nice enjoyable vid to watch, welcome to ebiking, and yes you still get a workout but the hills are flatter lol. Hope you have many more enjoyable outings on your new bike.

Sounds good, I'm growing to like Bafang a lot, such is the interchangeability of parts and programming.

Talking of upgrades to this set up, does the Bafang 810 colour screen couple up to this max drive ?

I knicked my daughters windows tablet to run my program, which is windows 10 , it auto loaded a driver. I'm all Apple

That's not good, has it pulled the threads to make arm loose or is it the paint that rubbed off the arms that has caused the initial looseness? Most likey made up from Fiat Uno's or Austin Allegro's I'll check mine , and now am tempted to undo then loctite in place , Helicoils kits are cheap and...

Seconded Redcup on the update for the new battery your fitting, What was your assist level up the hill? Re-Plug yours in and up the amps, crank the assist to 5 and give it a quick spin, see if you come back with a big grin it'll give you an insight to how it'll perform with a top battery...

Went out on mine again today with the keep current set to 60% rather than measly 30 , left the amps at 20 , Wow what a difference to the bike! with the 48t sprocket 30mph on the flat with no hard work however battery is working hard to fuel that motor I think ,as that sensitive battery meter...

If u need controller or a motor that'll replace with top quality try these guys at grin http://www.ebikes.ca/shop/electric-bicycle-parts/controllers.html

I had to delete then write the com number in the part of the program screen where is says com port as in COM3 as the screen was saying COM1 , then connected no problem. I'm using Bafang program that came with my lead and doesn't require admin permission or anything to run. Does your lead have...

I agree with the other members on this, If it's under warranty let them get their hands dirty.

Ditto the chain, it maybe that the rear cassette being new with it being tight bend the chain catching the tooth profile now and again, it may settle as it wears. Check alignment of derailleur very precisicely it'll only need a slight amount off to be able to lift the chain up the tooth before...

I went to the website, it hasn't got a switch , it says it is "possible" to raise the std speed limit , it has the standard dealer limit to 25kmh programmed into the unit which can be raised by inputting the password and raising in the sub menu same as the greenway. When u look at Agog dealers...

I would think a fair bit more oomph When pedal cadence is up compared to before where it was all at power start and work hard afterwards to get top end.