Search results

It is not a normal quick realese,Its the same as before.You just dont need a tool to realese the wheel.You can see it better in this video at 1.55 min

I had the same problem with my new bosh performance bike.It was condense in the battery.I belive the condense problem was in the switch for the led light indicator.I got a new battery without giving back the old.I opened it and disconected the the bms from the battery and cleaned it and let it...

This Fatbike cst motor have smaller diameter than Bafang cst,but wider.It is listed as 60-80 Nm at 350w while the Bafang Bpm,Cst 500w mtors are listed as 38 Nm only at Bafangs homepage.Could this be correct? Amy at GE Battery sells this motor: amy@gebattery.co New Motor...

Xiongda (not cst) and Dapu.Dapu motor are smaller in diameter 155mm.vs 177mm Bafang Cst and a little lighter,very strong and takes a lot to get it hot.My favourite motor.The torque feels diffrent.I belive the Dapu motor is buildt like a mac/Ezee motor.Smaller,but wider.But I dont know if it is...

Code 13 is 235 rpm

Yes,but it also says 36volt not 48volt

But if I run a 250w 36v Bafang cst motor at 48 volt.Would that be legal?

Yes,that is possible

Thats strange because the agogs uphill mtb is ce mrked and en15194 marked on the frame.It still has a marked 350w motor as shown in this video at 1.10 min I also talked to agogs.com 6 months ago and they assured me the bike was completly legal.they are big in europe...

Why isnt it marked 250w?.I am sure I have read it was 350w before.In Norway the exact same bike is sold with and 350w motor but certified as a 250w. http://www.finn.no/finn/torget/annonse?finnkode=54053622&searchclickthrough=true&searchQuery=elsykkel Also the neo cross is a 350w motor but still...

strong fast 48volt bike,I would buy it. http://www.agogs.com/uphill

Yes,Thats what I thought.The seller says it is around 210 rpm and 25 kmh max.If it is a 500w marked 250w.Then mybe the motor code is wrong to.I will find out in the end of the month

I am waiting for a new bike from China,kind of ugly actually.But I like it also.I asked for a 48v 500w bafang motor marked 250w.But I got an 36volt motor with an 12 ah controller;) They told med the motor is 500w.Guess I have to wait and see how it behave when I use the 48volt 23 a controller...

Yes,the 500w fits the 250w hub,I did swap them and tested the motor no load.But I want be using the 500w motor because of corrosion on stator and magnet and bad bearings.The magnet had lost some of its strenght to compared to the 250w magnet. D8veh:the 250w cst comes from elifebike.com and is...

Thanks for the info D8veh.I just opened two cst motors.one 250w and one 500w.For me it clearly looked like the 250w had less copper mass than the 500w cst.And the stator on both motors was 20mm not 17mm as one cst motor pictured at endless sphere.I could post some good pictures if you are...

I am curious how the torque on this kit is compared to a 500w cst 36v 30 amp

From what I read it is not much power diffrence in real life.Here is one review: http://www.ebikereviews.com.au/news/haibike-2015-models-debut-at-eurobike/ I tried a Cannondale Tramount 29er 2.With a bosh performance 2015 motor.which was very impressive,Very silent,I just had to buy it.Much...

I have just checked the speedometer.it is correct.I also looked at the invoice from xiongda.The invoice says 30 kmh loaded.I tried with full charged battery full throttle and wheel of the grounnd.no load speed is 33,1 kmh and 19kmh.Both motors have the same speed results

I have only checked the speed with the lcd3 that follows the kit.But I am sure it is correct.And it also the speed Bonnie told me.But I will check the speed with another speedometer that I know for sure is correct tomorrow and report back

No,it is not set.Both motors had the same speed and Bonnie told me the motors would have this speed when i ordered.I wanted them a it faster.They must have changed the windings for some reason