Search results

I don't have a mph meter at the moment so it's hard to say. What can I do to derestrict the motor?

Ok, so in the attachment I tried to identify all the wires. I labeled them. The speed sensor wire (red, blue, black) is not connected. The blue wire I disconnected yesterday was the cruise wire I think. The 6P Plug is not connected now. I think this is for a speed sensor inside the motor? I...

Hi, i haven't changed the 6 pin connector, so this was disconnected when I opened it. I will take some clear pictures of the wiring this evening. Thanks for the help so far!

Disconnected it, no change noticed. I'm starting to doubt if I can even change the max speed limit. Is there any way to be sure about this? When I'm driving around 25 km/h the support just stops or goes to a minimum. I want the motor to give all it's got ;-)

Hi, there is only one cable which loops out and back into the controller. It's blue. But I think you might be right, this can be the speed limit restriction cable. Can I do any harm testing this with disconnected cables?

Hi, thanks for the feedback. You can see a picture of the controller below. It's the KT36/48ZWSRT-LCD-C&D. I have a 36V Battery. I think that the KT-LCD3 display might be compatible and allows me to change the max speed.

Hi, I have a 5-wire LED display 880 (which is digital) and I want to change this to a compatible LCD Display where I can change the max speed. Currently, there are 5 wires: - Red = VB+ - Blue = Control - Black = GND - Green = DATA1 - Yellow = DATA2 I can't find any information on compatible...