Search results

5. Zip ties, reusable ones are good 6. Here's the link to the pedelecs BBS02 after market thread https://www.pedelecs.co.uk/forum/threads/after-market-bbsxx-crank-drive-gear.32691/page-4 7. Crank puller, Allen keys, the crank arm uses a 8mn Allen key, I use the below, some people use a long...

I recently bought a BBS02 and these are the things I wish I had bought with the kit. 1. Gear sensor https://www.brightonebikes.co.uk/store/p81/Gear_sensor_from_Gearsensor.com.html 2. You will also need a tool to tighten the locknuts...

This might work, Park HW5 bottom bracket tool...

Hi, thanks for the reply. I have a closed one, I might measure the square taper width and cut a gap in each side / lockring.

Hi, I was wondering if anybody can recommend a BBS02 open locking spanner. One that allows you to tighten the lockrings when the crank arm and pedal is on. Thanks

I think the current motor might be a Bafang SWXB motor After considering everything I will probably get the battery recelled by Jimmy. Thanks for all the replies.

Hi, I just checked the motor, the only thing it says us - Bafang motor address, 36 volt, 26, QC 02. It does not have a band brake, why so wide? Thanks for the reply.

Hi, I am looking for a rear motor that will fit 155mm rear dropouts (internal width). None of the rear motors Woosh do will fit, thanks to Andys help in this. The bike is already an ebike, looking to upgrade the motor and battery Thanks

What kind of shifter dies she have? Does it sit on top of the handlebar? The ones that sit below the handlebar are easier to use, they are known as rapidfire shifters. Some examples: https://www.sjscycles.co.uk/gear-shifters-rapidfire-trigger/

I would keep the front derailleur on (it hardly weighs anything) to keep your chain on the chainring. You can buy narrow / wide chainrings which are meant to help keep your chain on, Race Face, Hope (UK company) and others make them. I bought a cheap single speed crankset off eBay, keep my...

I found one. https://m.bikester.co.uk/park-tool-fr-13-bike-tool-5-10-for-screw-ring-black-574676.html

Hi, I just tried a park freewheel tool and the nut end hole is to small to fit over the 12mn hub axle. Can anybody recommend one that will fit. Thanks

Hi, I am looking to upgrade my 36v hub motor. What are the advantages and disadvantages of a 48v hub motor over a ,36v hub motor? Thanks

Hi, could you send a picture, this will help people to try and solve your problem.

Hi, I don't know if this helps, I fitted a full size mudguard to a suspension fork. https://www.pedelecs.co.uk/forum/threads/full-size-mudguard-on-rockshox-suspension-fork-hack.38256/

Hi, one of my pedal threads has gone on my BBS02 crank arm. I was wondering if anybody has a set to sell. Has anybody tried Shimano steps crank arms on a BBS02. Thanks for your help.

Hi, I was looking to add support to my BBS02 battery and incorporated my crud catcher bolts. My down tube has a diameter of 47mm so I bought a 50mm plastic pipe clip. I had to buy ithe black version online as most stockists only carry grey and white versions. I drilled a 6mm hole in the...

This is another option, energiser tour: https://www.rosebikes.co.uk/schwalbe-energizer-plus-tour-performance-line-clincher-tyre-2666675?product_shape=black&article_size=26x1%2C75+Reflex

Here is the data sheet for their tires. I have a pair of 26 x 1.75 fitted inflated to 65psi. Width 41.41mm and height 42.17mm, I just used a digital caliper, the width is slightly more accurate. If you buy them also buy some long adjustable zip ties then search for YouTube videos on how to fit...

Hi, here is the user manual for their forks. On page 14, table 7 you will find the required air pressure for your weight, you may need to buy a shock pump if you don't have one already. I would also buy a product called 'fork juice', it helps keeps your seals lubricated. I clean my top/inner...