Search results

You could use a three point buckle to help support the bag. Put a webbing strap around the top and bottom of the frame head tube. Another piece of webbing would go around and under the bag, these pieces of webbing would be joined together. You can also make an L bracket out of a piece of...

I have have these but they are not the dimensions you are after, a bit small.

This is 100mm wide and 280mm long, thin aluminium plate

I have a hard drive top plate if that suits your purpose, they are steel or stainless steel

I had to buy the below as my frame bottle holder bolts were not in the middle of the down tube. They also do two and four slot versions. I then attached my battery holder to this and wrapped two velcro straps around the battery and down tube...

Here's a Google search https://www.google.com/search?q=26%22+6+speed+rear+wheel&oq=26%22+6+speed+rear+wheel&aqs=chrome..69i57j0i22i30l3j0i390i512i650j0i512i546l4.10412j0j4&client=ms-android-oppo-rev1&sourceid=chrome-mobile&ie=UTF-8 Here's one on Amazon, never used that company before, your...

Do you know the size of the gap between your rear dropouts? Mountain bikes are usually 135mm or bigger depending on fixture method.

Ebike wheel or non ebike wheel

Collect all your bike scrap - old chains, cassettes etc, put them in a bag and put outside a scrapyard with the bag labelled scrap steel. Most scrapyards will take it for nothing and pay you nothing as they just add it to the scrap steel pile.

I just leave the plastic bit on, never caused any problems.

Use isoprayal acholol 70% in a bottle to clean your disk rotors, cheaper than brake cleaner and more economical to use than a spray

Hi, I am looking to buy a BBS02 motor only, any places people can recommend. Thanks.

Multiple companies contributed to the development of disc brakes for bicycles, including: Shimano In 1971, Shimano developed a disc brake for junior sports bikes that was based on the standard for sports cars. Hayes Bicycle Group In 1997, Hayes Bicycle Group introduced the first hydraulic...

I don't know if this helps anybody for their winter footwear needs https://muckbootcompany.co.uk/collections/sale?awc=82989_1731076320_daca4e3c0cfbf87a21fccf5243320ddb&page=1&source=aw&sv1=affiliate&sv_campaign_id=249371

Shimano, Park Tools or Knipex cable cutters

Grin technologies do ship to the UK. https://ebikes.ca/product-info/grin-products/all-axle-hub-motor.html

: Compressionless cables ? They do not compress (as much) end to end. So when you apply force to the brake lever more of that force ends up actuating the brake rather than shortening the overall length of the brake outer cable.

I find Kool-Stop brakes pads good.

One way to improve cable activated brakes is using Jagwire Compressionless outer cables https://www.google.com/search?client=ms-android-oppo-rev1&sca_esv=3571e5df92edb3af&q=jagwire+compressionless+outer+cables&sa=X&ved=2ahUKEwifvIfy5sWJAxW4nP0HHSmjLxwQ7xYoAHoECAsQAQ&biw=360&bih=672&dpr=2

What's the name of the bike?