Search results

Yes buddy. My thoughts exactly. I'll check the sensor ring first as a matter of course. making sure no magnets are missing also. I will have to strip everything down for access to the wiring as the connections look like they're enclosed in the controller box at the front of the battery...

Just an update. I've been in touch with EBikes as advised and they have suggested that the cut out issue is possibly due to the sensor ring being out of position? I don't think the displayer dimming will have anything to do with this personally? Anyway, I am intending spending a bit of time on...

Right guys. I've emailed and just awaiting a response. Lets see what they say. I've dropped the font size down so lets see if that helps some? Thanks peeps.

Absolutely no idea what you're talking about. I try to always use the same size, style and colour on all my posts. I only use an old fashioned laptop and no idea what Stylebot is? Far too technical for me I'm afraid

I did try the details as shown in the manual, and below yesterday but I don't think they exist anymore? B-Spoke Leisure The Cordwainers Southend-on-Sea Essex, SS2 5RU. The link you have provided is for: EBikes 12 Eldon Way, Hockley, Essex, SS5 4AD Don't know if they're the same company but...

I'm partially sighted so increase the size accordingly. Surely, like me, it's easier to read?

I agree entirely with your comments regarding moisture at the moment. I have no idea how many pin outs/connections this as because I was unable to dismantle it to check along with 'dry' solder joint or loose connections. I will have to dismantle the battery holder to access the controller to...

I did, in fact, try to disassemble this yesterday but following removal from handlebars could find out how to take it apart. It probably clips together? But, not wishing to damage it, decided to leave it alone for the time being. Was going to strip it down and check for 'dry' solder joints and...

Thanks for that. I don't know if you've seen my other post but I'm having problems with the display going dim in stages and then coming back on. I'm trying to locate the issue and thought I'd start here as this is a reasonably inexpensive part. A bit of 'Hit & Miss' I'm afraid as I have no idea...

I've been trying to find a replacement but cannot find the exact same one

Yes. That is what I'm thinking. I'll take a look at that first and go from there

Hi. I'm going to try to completely discharge it and the recharge and see if that improves the situation?

Does anyone know the proper name for this part? Thanks

Ok. I understand what you're saying. I was hoping not to have to strip everything down but it looks like I'll have no choice but to go through all ancillary components individually, dry them out, and go from there. I'm not convinced the battery is at fault so will leave that until the last item...

Just an update guys. Had a bit of spare time today and popped the bike in the kitchen for a few hours in an attempt to remove any residual damp. Following a full recharge the battery holds a steady charge of 28.8 volts now. I have noticed however that once I insert the battery and switch on, the...

I think I've got the gist of it. Not so simple for me I'm afraid. Just an update. I haven't had a lot of spare time but I've just recharged the battery and it now reads a steady 28.8 volts. I'm thinking of discharging the battery completely, doing another recharge and go from there. Not sure...

How do you arrive at this? It's a 24 volt bike. My old 36 volt bike used to return a reading of around 40 volts on the multi-meter.

Yes I have posted voltage. Fully charged 27.2 volts.

I cannot find room anywhere in the house but I never had any issues with my previous e-bike being stored in exactly the same place. I appreciate your comments and will, when I have time, investigate further. It may mean that I will have to strip down the electrical items, such as the handlebar...

Its not the most expensive bike, by far, but certainly not cheap compared to some others. Its not a folding bike either. The main power is, as you mentioned, from the two outer pins, but there is also power of around 2.5 volt from one of the other centre pins. Without stripping it down...