Search results

I'd like to increase efficiency of my cargo bike. It has a DD motor but as it gets heavy and I m on a start & stop city it uses a lot of power inefficiently. It gets worse when I carry passengers. Would a front q128h 201 rpm best for my setting? I just need the initial boost then it can switch...

My 2 leaf motors have well over 10000 miles on it (each). I changed 3 times the hall sensor and the freewheel is such a pain to service (stuck) and having to clean and lube the chain I decided not to bother anymore. Because my bike is heavy, when I used my Mac motor I used to change my brake...

I prefer my full suspension cargo tbh ;) Direct drive were the most reliable. I m considering a small hub to increase efficiency but I wonder if it will become headache or not!

What's a CD kit? How reliable is that? I need a bullet proof motor. I'm considering either adding the xiondga motor at 1.5kg on the front (but it's noisy) or get a bigger rear motor (mxus V3)

I need a powerful enough motor/set up for 2 passenger or heavy passenger! :cool:

I successfully carried passengers on my bike, I did 5 miles and they felt much better than my previous one. I ve even managed to carry 2 passengers: :Dhttps://www.dropbox.com/s/aqd6pjj0st5ap6v/IMG_20180526_193545~2.jpg?dl=0 Definitely an improvement. The rear suspension was a bonus and made it...

Can you confirm it creates reliable connection? I will buy it

That's what I currently use. But they are only good enough for small wire. On bigger wires the solder doesn't spread evenly and create loose connections. also, with the heat the glue sometimes expand too much and go out from the heat shrink. I m not that happy for these

Don't they crimp all for planes? How do they have good join and not us?

Hello In the attempt to reach reliability and simplicity of update, i'd to change all my connector to crimping instead of soldering. I've changed to powerpole 45A and I'd like as well have something for butt connectors and others. I have this now...

I can't see the picture

Ok, on a ridable state: https://www.dropbox.com/s/fj7f2z9jrhf2q3t/IMG_20180521_010859.jpg?dl=0 Next step: - add footpegs - add bigger bag with locks Feels a bit high with the cushion... Although I'd say it worth it!

Good idea, thanks

I'd like to put my controller and all wiring inside a waterproof bag: https://www.dropbox.com/s/y2jnrnnifd5wijj/IMG_20180519_235418.jpg?dl=0 How can I deal this? https://www.dropbox.com/s/96swgtwax1ksguo/IMG_20180519_235507.jpg?dl=0 Or would that be safe to leave it like this? Would water just...

My £14 pannier: https://www.dropbox.com/s/m1z9u7iyku2y1cw/IMG_20180517_183459.jpg?dl=0 http://s.aliexpress.com/mmiMvABz

It's 20" while with double suspension. I have to admit it's not always the most comfy so I get big seat and cushions. It's not safe over 30mph but I rarely go that fast in London anyway

Ahah yeah its the tank v1. Wait for the V2 coming up, it should be ready soon. This one will be bigger and heavier! And as bonus, designed to carry sexy chicks ;) And I take extra care to protect the batteries from rain and damage. It's a double layers of heavy duty canvas protecting the...

Here's my current bike: https://www.dropbox.com/s/qq7rj31rcjonjfu/MVIMG_20180226_093910.jpg?dl=0 You can note that even the wheels are off odd size (20") which makes them harder to sell. The only thing thieves are interested in are the bag surrounding the frame. However when they open it they...

Ahah shall I take it as a compliment? :)

Have been using it daily for 4 years in London and never had issue with any decent lock. If it's unique they won't steal it because they don't know how to sell it either! For safety, you need to ride in a way you consider any driver want to kill you. Always have decent margin of safety to...