Search results

You guys may like having your bike cluttered with crap all over the place and all the the handle bar space taken up with clutter but not for me.

Water proof cables can be tested but the user has to make up Y leads that can be inserted between the wp connectors to carry out testing. The easiest cable is the three pin one as it will suffice to test external spd sensor, PAS & throttle. A nine pin one would need an extra M/F lead to be...

Flatish terrain I manage 30 - 35miles form my bespoke HG2 12s/2p , 6ah/264wh battery. Albeit I only use PAS1 and approx. 58 - 65w of power. Wind , tyre psi and general riding ability and fintness above speed cut off will determine range.

I don't wear tin hats.

There is no programming to carry out with the KT controllers so no additional PC hook up is required, there are a few parameter changes that can be done via the screen. The changes are purely cosmetic in how the system detects certain signals.

Now you are being stupid Saracen , I have already said it is the way I hold my head . I don't look up right and straight ahead but slightly down and ahead , the angle of the glasses point down too low. All that matters is they can capture evidence and number plates , the quality otherwise...

I tried out my spy glasses today and like a fly to **** they picked up two bad pieces of passing. What do you think ? Both are reportable if only for the drivers to get a stern talking to, but don't think Sx police will do anything. Not sure these glasses are going to much good for me as I...

Ladder tied lashed at top to tree. 5 ton rachet strap used to tie around large sections being cut and tied off lower down . Down on the ground one can safely lower the sections . It is method and working safe that is important, rushing gets one nowhere.

My one is currently tied off at the top to a big conifir tree, which I lopping the top off.

Cheap enough £5 on ebay.

Rather then work backwards with a LV reading , best to start with the battery and work forwards. Double check battery out put voltage first. If battery reads ok then controller out put voltage next , it may have a regulator component failure on the voltage side. I had this happen once on my...

I still use a double ladder gets me well above my roof height.

Power is down to the controller power supplied, typically 12- 15a is the max rating for most generic controllers but also the battery power output is another factor. We would need to know your T34 battery specs and the controller rating. For more power then more controller amps are generally...

Test the controller for a mosfet failure.

Does walk assist work ? Depress minus pad and hold , walk assist should kick in to 6kmh .

If the loom is a non KT specific one, then the wiring sequence may not be compatible. With looms they all usually split off at the bulbous end where they all splice off for other peripherals so may be the reason why it isn't working. E-bike Integration Cable Waterproof 1-5 For KT Controller...

Problem is the new cells should have been charged seperately to the level of the old ones before fitting. As cells are out of balance best option is to manually raise the new cells /unbanaced cell groups to match the others. 0.6v is quite a way out and the BMS will take ages to try and sort...

If you fault find and find it it is ok then make sure the sensor is aligned with the magnets on the disc and the gap is 1mm or less. The disc should be securely fixed and not able to rotate manually around it's axis . If a new PAS is needed then one of these will work but needs a crank puller...

All PAS sensors work the same as all have three wires. Fault find the PAS first to see if in fact it is faulty. Connect /fit it back on , you have the sm block connector so is easy to test. Does the red led not spark to life at all on the sensor ? To fault find use a meter and probe the...

I think Kudos have shut up shop now or were scaling the business down.