Search results

Ok thanks I have a few electrical engineer friends so I think I'll ask them for their help trying to repair it by soldering it first, that seems like the most simple solution. But its nice to know I can upgrade to an LCD with a new controller in the future, I thought that option would be lost...

Hi, Thanks for all the info! I didn't know the new one didn't have a controller. I tried swapping over the top part of the cradle and cleaning off the pins so they move smoothly but unfortunately it still wouldn't start. so I took the controller out a little to look closer at the wires and...

The current wires connect into the old cradle like this (below): All with connections like this from the wire on the cradle to the wire on the bike: (these don't pull apart -or at least not easily- as far as I can tell) One wire goes to the pedal sensor, one to the motor in the rear wheel and...

Hi all, I have a Greenedge CS2 ebike whose battery (36v, 9Ah, 2 pin - old style) stopped working as it was quite old and had been dropped a few times. So I ordered a new battery from eBikes direct (after a lot of faff), the only one they had was a 36v 11 Ah (still 2 pin old style). When it...