Search results

Hello I have a greenacre cs2 which had some issues with its pas sensor I sent back everything except the bike, battery and motor to e bike direct and they diagnosed a number of issues including crazy settings and a shot Pas sensor which was replaced got the kit back and reinstalled it and...

Thanks for the reply it's bizarre but I was looking to buy from spokes anyway cheers

Hello I am in the process of threading a hub motor into a rear wheel I have used a spoke calculator and the length is 244.4mm ; do I purchase 244 or 245mm length spokes and my original calculation was with 14mm nipples I am assuming I must buy 14mm nipples due to my original calculation ...

Not for sale anymore

Yes thanks for that I was assuming when you say 36v 250w that's that but clearly that is not the case

Geared differently apologies

Hello in general will a 26" ebike motor work in a 700c wheel provided it fits between the stays there is nothing specific so could a 20" motor fit in a 700c or ultimately are they heard differently

Peeeg submitted a new listing: Greenacre cs2/16 19" alloy MTB 36v 250w working with issues - Greenacre cs2/16 19" alloy MTB 36v 250w working with issues Learn more about this listing...

Once again many thanks

Thank you I'll try reseating it; it's reading something so it might not be sitting correctly aside from that it's a new motor and or controller or fitting an external sensor on the original ; all works though and it's fast

I know it's cheaper to buy the kits but from a generic parts point of view are most ebike parts from China interchangable or are there any watch outs

Yeah I must admit I've had a good look for one but it's not obvious

Just to add the display is showing speed however it is moving between 0.2 and 0.6 mph is there a standard speed sensor anywhere or does the motor work it out

Hello I posted a couple of days ago with a greenacre cs2/16 I'd bought broken turned out the Pas wires had been butchered and put the wrong way round. So I changed them and all was well, so when I pedal it helps and when I stop it stops. So in the light my LCD display is not showing speed...

Thanks must admit this is a very helpful forum

Brilliant thank you

Hello I've built a few ebikes now with practically zero knowledge of the electronics behind, which to be honest with modern kits etc is pretty redundant; however I was looking for a book that could explain ebike electronics for a novice ? Or you tube series etc. So I can increase my knowledge. I...

Yeah it was bought on the bike to work scheme and has very little use although it was being stored outside in a car port!!!! I was looking for what I can salvage to make another ebike for myself they had taken it to a "specialist" who said he'd repair it for £100 so they cut there losses and I...

Thanks for your help sir you were spot on blue was signal yellow was ground and red was live essentially swap blue and yellow fully working very happy excellent site !!!!!

You are spot on yellow ground red live and blue was signal all working fine