Search results

I get confirmed, that Yosepower is sending me a new controller from China. So I try to find what's wrong with the controller. First of all I get it from battery holder, remove PCB from case and try metering phases - all was OK. I connect it to HUB/battery/display and all works fine :oops:. But...

Thanks, that's no problem to check something with meter. My readings: pole / phase1 / phase2 / phase3 ============================ minus / 12k / 12k / 190k plus / 10k / 10k / 40 It look's like something is wrong wit controller. From YOSEPOWER service wrote...

it's my first ebike experience (actually bike is not mine, it's a gift for the father). - when rotating wheel in normal direction (plugged or unplugged controller), it's like a normal bike - when rotating wheel in opposite (backwards) and controller UNPLPUGGED, there is some noise and resistance...

I plugged/unplugged the controller/motor wire connector many times with no change. Also if is disconnected, I got a 24 error code at the display (Abnormal hall signal of motor). Also if wheel is rotating I'm reading speed value. All I did is measure phase pins in the motor connector (3 thicker...

Hi all. I purchased rear yosepower kit (casette, 28", built in controller with battery), battery charged, all set-up, no error at C500 LCD display but motor is still silent :( The red LED at PAS sensor is blinking when pedalling , also display shows speed but no discharging bars at all. Also I...