Search results

I saw on youtube firefighters using a large fire blanket that they covered a burning car with it I was surprised it stopped the flames and as long as it was covered the fire stayed out stayed out. they sell fire blankets on Amazon for twenty five bucks. I think I am going to buy one. (251)...

I am new here and this site helped me find the answer to my problem. It helped me narrow down the problem to the display LCD and I replaced it and all fine. I dissected the old LCD and discovered indications of water on the PCB which makes sense because the day before the failure I was caught in...

Your problem makes a good argument for the use of senserless controllers. Good luck

I would like to see a web incident reporting site or forum that would log all ebike batterie calamities which would log all the suspected causes of an incident as well as who the manufacturer of the individual cell is, the designer and assembler of the battery pack as well as the make and model...

One other possibility could it be heat damage? Heat can melt the hall senser wire causing a short.

Is it possible there is water in your hub? Also is it possible there is an overvoltage to the hall. If you have access to your hall get the number off it and look up the data sheet on it and see what the rated voltages are

I have the same problem. The lcd I had before worked ok for these settings then it was water damaged after a rainstorm got an error 10. So, I purchased a replacement, and the replacement cannot access p9-p12. I have 2 controllers and it happened to both it seems to be related to the sw900 not...