Search results

Update - After reinstalling my controller and altering the parameters, I now have a speed shown when coasting. I've no idea what has changed so I've made a note of the working settings. Thanks for all the help!

Thanks for your reply again vfr400. I have 5v on the white hall wire into the controller. Tapping this to ground a few times a second still gives no speed reading whatsoever. My S866 settings are as follows - P1 =3 P2 =1 P3 =36 P4 =5 P5=1 P6 =26 P7 =1 P8 =100 P9 =1 P10 =0 P11 =2 P12 =5 P13 =8...

Thanks again. I'll have another look in an hour or so. I'll upload this post with my settings. I can't see that anything is incorrect though.

Yes, but I have a constant 5v on the white wire on the hall plug. By way of an experiment, I've disconnected the 5v constant from the white hall and added a hall sensor with a magnet. I get 5v everytime i pass the magnet over the hall. I have wired this into the white and ground and a 5v supply...

Hi, thanks. I tried setting p7 to 1 (amd many other variables) but had no luck. It picks up a speed reading if i turn the wheel backward this engaging the clutch. I still have a reading when only the phase and no hall plug is connected.

Hi, I've recently fitted an s866 lcd and controller to my voilmart 250w geared hub. However, I can't get a speed reading when coasting. This means it only measures trip distance when the motor is engaged. I've tried a hall sensor wired to ground, 5v and signal to white wire but no difference at...