thelarkbox's latest activity
-
thelarkbox replied to the thread Fitting yose power.It Should be plain sailing, bolt on the battery base n display, fit the wheel, plug it all together and tidy up the cables.. If any... -
thelarkbox replied to the thread Fitting yose power.The default one piece yose-power pas sensor requires a circular < 17mm diameter crank, it might fit on a 17mm hex?? the alternative...
-
thelarkbox replied to the thread Disc rotor bolts.A wide rubber band can aid a poor fitting bit in a chewed up screw head when sandwiched between the 2 metal pieces, on occasion doubling...
-
thelarkbox replied to the thread Error 6.A quick google suggests a battery under voltage condition.. google for "Ebike M5 lcd error codes" its the display unit that decodes...
-
thelarkbox replied to the thread ADO A20 F.Is the display a new unit supplied with the new controller ? If original with branded f/w loaded it may not link correctly with a...
-
thelarkbox replied to the thread A cycling trailer that turns any bike into an electric cargo bike.Pitiful.. best part of 2k for a fraction of the capacity of a £70 trailer.
-
thelarkbox reacted to guerney's post in the thread A cycling trailer that turns any bike into an electric cargo bike with
Like.
I do wish the deisgner had been more ambitious - this enables carriage of two small children or a couple of bags of shopping. Kids grow... -
thelarkbox replied to the thread Suggested kit for conversion.Fwiw 2 things i didnt consider properly pre convesion, 1) brakes my rim brakes while adequate for my use could be better and do need...
-
thelarkbox replied to the thread Yose power.Pretty sure the 250w hub will have plenty of 'OOMPH' for you. and if you do need more a dual voltage controller upgrade and a 48v...
-
Many Thanks for all your replies its been a great help, I was thinking on the lines of going 350w but thought better of it, don't want...
-
thelarkbox replied to the thread Wheel change on 2014 bike.Rebuilding a wheel with a new rim is no longer the dark art thanks to lots n lots of 10,imute+ youtube how-to vids.. Yes you will screw...
-
thelarkbox replied to the thread Hex ratchet driver for 15mm ring spanner.Not exactly the same but i would argue more versatile are the 3x 10mm-1/4", 13mm-3/8", and 19mm-1/2" square drive adaptors, you only...
-
thelarkbox replied to the thread shengyi-x2 as a rear carrier Motor;-).Seems like you have earnt some bragging rights, so carry on ..
-
thelarkbox reacted to mechaniker's post in the thread shengyi-x2 as a rear carrier Motor;-) with Like.
yeab, 2008 did came the a lot of conversion kit companys and a few of them sold as "midmotor" the cyclone-kit including me but that...
-
thelarkbox reacted to mechaniker's post in the thread shengyi-x2 as a rear carrier Motor;-) with Like.
I always have trouble with my 150kg and my hubmotor-bike climbing hill´s so I thought of a different way and placed my shengyi-x2...