Peter.Bridge's latest activity
-
PIf you put a spacer under the disc, the disc won't line up with the caliper. You normally need to put a washer on the axle that side to...
-
PThe screws normally come with the motor. They should be already in it, and they're the correct length for the motor. They put a plastic...
-
PPeter.Bridge reacted to Jodel's post in the thread Are the KT controllers slightly pessimistic as far as battery level ? with
Like.
I'm a relative newcomer to the KT system, so still exploring all the configurable options. I have never paid much attention to the... -
PAnother question - what's the best thing to do when you are swapping over a disc rotor and the bolts from the original are too long for...
-
PCustomer feedback: Hi Andy, Thanks for the bits. I finally managed to find time to fit the kit and try it. All I can say is AWESOME...
-
PPeter.Bridge reacted to Sturmey's post in the thread Are the KT controllers slightly pessimistic as far as battery level ? with Like.
One thing I can recall for certain is that the LVC voltage setting (C12) also has a bearing. In my case its set to the default value of...
-
PPeter.Bridge reacted to saneagle's post in the thread Are the KT controllers slightly pessimistic as far as battery level ? with Like.
Good point. P5 is basically a damping factor for the battery display. If you set it too low, the display goes up and down every time you...
-
PPeter.Bridge reacted to Sturmey's post in the thread Are the KT controllers slightly pessimistic as far as battery level ? with Like.
You need to adjust your P5 setting. There is a formula that says the voltage when the last bar disappears on your LCD is something like...
-
PPeter.Bridge reacted to saneagle's post in the thread Are the KT controllers slightly pessimistic as far as battery level ? with Like.
I've never noticed anything special. It probably depends on your battery too. I know when mine goes down to two bars, I haven't got much...
-
PPeter.Bridge posted the thread Are the KT controllers slightly pessimistic as far as battery level ? in Conversion Kits General Discussion.Just been on a 15 mile ride on my folding bike with a 36V 10Ah battery and KT controller / display, it is showing half full battery on...
-
PPeter.Bridge reacted to Bikes4two's post in the thread Pendleton eSomerby Controller Upgrade with Like.
@vfr400 - setting P2=1 solved the speed reading issue - now my knowledge extends to knowing my Bafang motor has one speed magnet - thank...
-
PPeter.Bridge reacted to markmorr62's post in the thread Pendleton eSomerby Controller Upgrade with Like.
Many thanks for the excellent article, I completed the upgrade in about an hour and the difference is remarkable, my wife is enjoying...
-
PSo there we have it @Peter.Bridge , we now know why d8veh and saneagle have never been seen in the same room. Mind you the original...
-
PPeter.Bridge reacted to Ghost1951's post in the thread E-bike journeys and pictures around the South Tyne Valley with Like.
Stunning weather the last few days, and supposedly for some days to come. I've been out on both my bikes today and ridden them...
-
PPeter.Bridge replied to the thread For Sale Bosch Powerpack 400 Frame classic+ battery.£180 (cost £360 June 2023) I think the price is on there
-
