PC2017's latest activity
-
PC2017 reacted to saneagle's post in the thread Hub motors using disk brakes. Plastic spacer on or off? with
Agree.
They would be too short. In case you still haven't got it: Disc + spacer = screws too short No disc, no spacer = screws too long Disc... -
PC2017 replied to the thread Hub motors using disk brakes. Plastic spacer on or off?.Consensus, it's nice just to cross reference my logic with my peers, once in while. On it. I was thinking they might too short with...
-
PC2017 reacted to thelarkbox's post in the thread Hub motors using disk brakes. Plastic spacer on or off? with Like.
Fwiw the one rotor i have removed from a rear hub drive had no spacer and was attached directly.
-
PC2017 reacted to Nealh's post in the thread Hub motors using disk brakes. Plastic spacer on or off? with Like.
Remove it.
-
PC2017 reacted to saneagle's post in the thread Hub motors using disk brakes. Plastic spacer on or off? with Like.
The spacer is for the screws when you don't have the rotor fitted. If you put the screws in without the spacer and rotor, they're too...
-
PC2017 posted the thread Hub motors using disk brakes. Plastic spacer on or off? in Electric Bike General Discussion.So I noticed the LBS left the plastic spacer on my front hub, when they added a 6 bolt Clarks rotor. I personally installed the motor...
-
-
-
PC2017 replied to the thread 29er MXUS XF07 wheel build, good idea, bad idea?.Correction for above posts. TREDZ is not sports direct, my bad. EVANS.
-
PC2017 replied to the thread PAS sensor (KT-V12L) install issues.You inspired me... Things of note for the KT-LCD3 [and possibly other LCD based KT] C1 will need changing from "reverse" or left to...
-
-
PC2017 replied to the thread PAS sensor (KT-V12L) install issues.Aye, aliexpress is funny, for xbox series XS parts I trawl through pages before I find the price and seller I am looking for + signed...
-
PC2017 replied to the thread PAS sensor (KT-V12L) install issues.Is there a KT right? Edit long time since I looked topbikekit has a D12R OMG, I have about 2x D12L's do really need another? ten quid...
-
It exists, but it's hard to order in my area.
-
Not a pas sensor expert, but my original yose power kit (about 18 months old) included pas sensor is a nominal few mm thinner in its...
-
PC2017 replied to the thread PAS sensor (KT-V12L) install issues.I found them to be inconsistent at best, some did work well but failed not long after, while others are stiff to operate, not mentioning...
-
PC2017 replied to the thread PAS sensor (KT-V12L) install issues.Doubt you'll get much slimmer, on the PAS that is... Any smaller and the costs would increase not to mention mounting it. There is many...
