Michael 2025's latest activity
-
MMichael 2025 reacted to throwawaychap's post in the thread Confused and looking for 48v 250w rear hub since Yose won't sell me 250w 36v kit with 15ah battery with
Like.
Hi gentlemen, first things first Yose replied to my email. (I asked, if possible, to be informed of their 350w rear hub motor's RPM at... -
MMichael 2025 reacted to thelarkbox's post in the thread Think about buying a Yose power need help guys with Like.
Fwiw i installed a 250w yose rear wheel kit circa 2 years ago, i also bought a kt dual voltage controller with the intention of sourcing...
-
MMichael 2025 reacted to Nealh's post in the thread Think about buying a Yose power need help guys with Like.
From experience I prefer the 22a S09S over the S06S , but that is down to my use and my slowish cadence . Downside is the 9fets are in a...
-
MMichael 2025 reacted to Baz the balloon man's post in the thread Think about buying a Yose power need help guys with Like.
I think 17amp would do for 250W that said my 15amp KT works well with 250 W motors on the bench all different brands .
-
MMichael 2025 reacted to Wayners's post in the thread Think about buying a Yose power need help guys with Like.
@Michael 2025 eBay. Item 256369636190 Here That's what I've ordered I'm winging it with some advice from here so I am no expert
-
MMichael 2025 reacted to saneagle's post in the thread Think about buying a Yose power need help guys with Like.
The average 250w medium sized geared hub-motor can manage about 22A at 36v and 17A at 48v. If you go higher than that, there's a good...
-
MMichael 2025 replied to the thread Think about buying a Yose power need help guys.See want to keep stealth as possible draw less attention to me self so don’t want big control boxes or huge battery’s
-
MMichael 2025 replied to the thread Think about buying a Yose power need help guys.That’s what am hoping to do , think this looks better route to take That means could swap the battery from 36v to 48v with this...
-
MMichael 2025 replied to the thread Think about buying a Yose power need help guys.Weight is 15 half stone Hill grade about 5% to 10 % no heigh than that 10 miles there and back to work
-
-
MMichael 2025 replied to the thread Think about buying a Yose power need help guys.So this controller paired with a 250w or 350 w better that the Yose power controller ??
-
-
MMichael 2025 replied to the thread Think about buying a Yose power need help guys.This what am more after light peddling 22 mph and get up few medium hills
-
MMichael 2025 replied to the thread Think about buying a Yose power need help guys.Sorry for the late reply , was on night shift last night there some good idea there a think will hold off buying at the moment have...
-
MMichael 2025 replied to the thread Think about buying a Yose power need help guys.Very interesting read that , and no me bikes got 8 speed , so 250 w with separate control would be more beneficial for me , would...
-
MMichael 2025 replied to the thread Think about buying a Yose power need help guys.Uk. , a don’t mind been little bit over the legal limit it’s not to go crazy on it’s just get work and back will be installing 36 v...
-
MMichael 2025 posted the thread Think about buying a Yose power need help guys in Electric Bike General Discussion.Right am thinking about buying a Yose power 350w 36v rear hub kit ( cassette) Looking to install it on 20inch frame carrea hellcat...
