merk's latest activity
-
MTest the motor hall sensors before you go any further. https://www.ebikes.ca/documents/HallSensorTestingFinal.pdf I don't think faulty...
-
Mmerk replied to the thread E-Bike Motor Problems 36v 250w.There is a wire for the motor on the controller to receive the 9 pin connector. Between this and the motor wire, their is a 9 pin...
-
Mmerk replied to the thread E-Bike Motor Problems 36v 250w.You answered already, that although it is connected this way, there is a chance, though uncommon that the wires are mismatchwd
-
Mmerk replied to the thread E-Bike Motor Problems 36v 250w.I thought it is obvious, that is is connected via a 9 pin connection. Is this not obvious? Am I misunderstanding something?
-
Mmerk replied to the thread E-Bike Motor Problems 36v 250w.It is inserted all the way to the line. The nine pin connector comes out of the drive side of the motor. This is the only wire from the...
-
Mmerk replied to the thread E-Bike Motor Problems 36v 250w.Thanks. The wire appears undamaged and is inserted properly. The rear hub motor I believe is a promovec 250w 36v. The new controller is...
-
MI have a Christiania e cargo bike. I have replaced the battery and the controller. I have tried two controllers with the same result...
