matthewslack's latest activity
-
MTechnically they always have been, I've been warning about this for many years. When a motor is added to a bicycle a motor vehicle has...
-
Mmatthewslack replied to the thread HIMO C26 MAX Commuter Electric Road Bike clutch/planetary gears required.Count the teeth on the inner, the outer and the planet gears. They are related by a formula. If you know two of them, you can calculate...
-
Mmatthewslack replied to the thread Not sure if this is in the right section.It's more useful if can say what those wires connect. Then we know what you are talking about. What is at each end of them? Are these...
-
Mmatthewslack replied to the thread Suntour HESC system doesn't work after replacing pedal sensor..That's a torque sensor for you! Good to know that the spare you found was compatible with what you had. Experience is the best teacher...
-
Mmatthewslack reacted to UnclePuncher's post in the thread Suntour HESC system doesn't work after replacing pedal sensor. with
Like.
Apologies all. I'm an idiot. I've never worked on one of these. They don't kick in when in the workstand. You have to actually stand on... -
MThanks for all the help Mathew, the bike came with the cable tool so hopefully this should go smoothly, and I have the rubber Shimano...
-
Mmatthewslack replied to the thread Suntour HESC system doesn't work after replacing pedal sensor..Just to be clear, there are links to images of three components, but you have only replaced the pedal sensor, not both the pedal sensor...
-
Mmatthewslack replied to the thread Shimano Steps 5000 query.Two steps to this. 1. Make it work. 2. Make it tidy. I'm guessing there are just two cables attached to the EN-100, one from the motor...
-
Mmatthewslack replied to the thread Not sure if this is in the right section.When you say 36V 'on the red and black to the motor' is that really what you mean? The only red and black in the actual cable that...
-
Mmatthewslack replied to the thread Shimano Steps 5000 query.I've always used ebay and secondhand...here are a couple of current listings... E8000, looks like display only, so needs switch unit...
-
Mmatthewslack replied to the thread Help! Apollo phaze.Looking at the specification, it is a bottom end bike with tiny battery only 6 speed and rim brakes. It likely has a fairly low current...
-
Mmatthewslack replied to the thread Not sure if this is in the right section.Move a magnet past the sensor in the direction, position and distance it expects. Try both poles, both directions. If there is an led on...
-
Mmatthewslack replied to the thread Which PAS sensor do I need?.As a mid-drive rider I can't answer your main question from direct experience, but I have read many times that chainwheel side PAS is...
-
Mmatthewslack replied to the thread Which PAS sensor do I need?.That red chainring looks like a narrow-wide type, intended for a 1x gearing setup.
-
Mmatthewslack replied to the thread Prices of the electricity we use to charge.The advice I would have expected would be 'go back to a normal diet'. How long before AI develops succinctness?