Martinonwheels's latest activity
-
MMartinonwheels replied to the thread Which PAS sensor do I need?.Thank you, they were interesting threads. I dont want to have to remove a lock ring to fit a bracket so that leaves two options. Drill...
-
MMartinonwheels replied to the thread Which PAS sensor do I need?.Thank you, I was leaning towards a crank side PAS. My thinking is that if i got the type that fits to the chainwheel at least its held...
-
MFwiw my bikes crank axle is a tad wider then the 17mm optimum for the default 1 piece pas sensor supplied with the yose kit resulting in...
-
MMartinonwheels replied to the thread Which PAS sensor do I need?.Sorry, do you mean on the chain wheel side?
-
MYou can use any one you want. All you have to do is drill or dremmel out the hole to the right size. ISIS cranks are normally a bit...
-
MAs a mid-drive rider I can't answer your main question from direct experience, but I have read many times that chainwheel side PAS is...
-
MMartinonwheels replied to the thread Which PAS sensor do I need?.The 2 part ones that clip over the crank shaft all seek to have an internal diameter of around 15mm but as you know my bike crank shaft...
-
MThat red chainring looks like a narrow-wide type, intended for a 1x gearing setup.
-
MMartinonwheels replied to the thread Which PAS sensor do I need?.It is indeed, but if I fix the little silver chain wheel to it the chain wheel PAS would fit onto it.
-
MDear group, I'm shortly to be getting a Yose Power kit for my old bike so why I'm waiting I thought I'd do the old bike up which...
-
