remove speed limit completely bosch gen 2

[soundwave]

and keep the display with the right speed ect then get 1 of these.

The Product Features of the ASA eSpeed B25.14 Tuning Tool:

• The ASA eSpeed takes away the 25 km/h speed limitation of electric bicycles with Bosch Performance / Active Line engines in the modes "Sport" and "Turbo" (other modes can be programmed user-specific).
• The functionality of your HMI will not be affected: Speed, km, max-speed and average speed will still be shown correctly.
• High-tech product with microprocessor-based microelectronics.
• Installation without damage to the cables / you can undo the tuning whenever you want and restore your bikes original condition.
• Self-calibration for different wheel sizes.
• The light functiion will not be affected, too.
• The electronic system of the tool can be controlled via the HMI.
• There are no additional switches, cables or dongles necessary or visible.
• Robust & splashproof design.
• Use status LEDs for functional control during the installation process.
• The device has user-programmable functions, too.
• ASA eSpeed B25.14 works with electric bikes powered by Bosch Active Line, Performance Line and Performance Line CX systems (Bosch Gen2) with motor-support until 25 km/h (from 2014 onwards).
• Not suitable for Bosch Classic Line engines and older models.
• Note: You need special tools to install this device: The ISIS pull-off tool and the Bosch Spider (both tools are not included).

Scope of Delivery:

 1x ASA eSpeed B25.14 tuning module
, 1x installation guide

Legal Statement and Liability Disclaimer

• We want to point out that the use of tuning devices like the ASA eSpeed is not allowed on public roads, because these tools manipulate the speed of your bike. You may only use electric bike tuning tools on private, closed areas or on designated routes.
• No liability is assumed for any current or future damages to persons and / or objects caused by the improper use / installation / deinstallation of the ASA eSpeed tuning tool.
• You have to use the ASA eSpeed for Bosch E Bikes at your own risk.
• The manufacturer´s warranty of your electric bicycle may be limited or can completely expire if you make your bike faster with tuning tools.
• Please drive carefully. We recommend to wear security clothing and a bicycle helmet.

Special Tools to open the Bosch engine:

Bosch Active & Performance Line (Gen2): “Crank Remover”.

http://www.ebiketuning.com/shop/product/32-asa-espeed-b25-14.html

 

[James Smalley]

Well, well, well....

 

[soundwave]

there will be a throttle mod soon for Intuvia

 

[EddiePJ]

there will be a throttle mod soon for Intuvia

I guess that if you are already transforming it it into a motorbike, then you might just as well go all of the way.

 

[soundwave]

might go fast but it wont go far tho

 

[Vasilis_Pap]

That is not as easily removable than the badass

 

[LEBC Tom]

And if not installed properly it seems to destroy the motor. Had a guy in yesterday who had this on his Haibike and I did try and help, flashed the software and motor but to no avail, a very expensive mod!

 

[trog]

And if not installed properly it seems to destroy the motor. Had a guy in yesterday who had this on his Haibike and I did try and help, flashed the software and motor but to no avail, a very expensive mod!

and keep the display with the right speed ect then get 1 of these.

The Product Features of the ASA eSpeed B25.14 Tuning Tool:

• The ASA eSpeed takes away the 25 km/h speed limitation of electric bicycles with Bosch Performance / Active Line engines in the modes "Sport" and "Turbo" (other modes can be programmed user-specific).
• The functionality of your HMI will not be affected: Speed, km, max-speed and average speed will still be shown correctly.
• High-tech product with microprocessor-based microelectronics.
• Installation without damage to the cables / you can undo the tuning whenever you want and restore your bikes original condition.
• Self-calibration for different wheel sizes.
• The light functiion will not be affected, too.
• The electronic system of the tool can be controlled via the HMI.
• There are no additional switches, cables or dongles necessary or visible.
• Robust & splashproof design.
• Use status LEDs for functional control during the installation process.
• The device has user-programmable functions, too.
• ASA eSpeed B25.14 works with electric bikes powered by Bosch Active Line, Performance Line and Performance Line CX systems (Bosch Gen2) with motor-support until 25 km/h (from 2014 onwards).
• Not suitable for Bosch Classic Line engines and older models.
• Note: You need special tools to install this device: The ISIS pull-off tool and the Bosch Spider (both tools are not included).

Scope of Delivery:

 1x ASA eSpeed B25.14 tuning module
, 1x installation guide

Legal Statement and Liability Disclaimer

• We want to point out that the use of tuning devices like the ASA eSpeed is not allowed on public roads, because these tools manipulate the speed of your bike. You may only use electric bike tuning tools on private, closed areas or on designated routes.
• No liability is assumed for any current or future damages to persons and / or objects caused by the improper use / installation / deinstallation of the ASA eSpeed tuning tool.
• You have to use the ASA eSpeed for Bosch E Bikes at your own risk.
• The manufacturer´s warranty of your electric bicycle may be limited or can completely expire if you make your bike faster with tuning tools.
• Please drive carefully. We recommend to wear security clothing and a bicycle helmet.

Special Tools to open the Bosch engine:

Bosch Active & Performance Line (Gen2): “Crank Remover”.

http://www.ebiketuning.com/shop/product/32-asa-espeed-b25-14.html

Hi, I fitted one of these to my Cube Hybrid Reaction Pro over the weekend.
It seems to work very well.
You just have to be very careful and double check everything before you switch it on for the first time.
I have covered about 50 miles since .
Very happy so far.

 

[trog]

>>>Oh and i didn't need the Bosch spider tool.
I only had to remove the R/H crank to split the plastic motor case and gain access to the plugs/sockets which were underneath the right hand cover.