Help! Manual of C961 Display

[Gh0stxSinghx]

Hi all,

I get manual of C961 Display from Wheel size setting. I try open wheel size setting but not show my display for Range from 8 to 32 inch wheel size setting.

Please help how get open 8 to 32 inch my dispaly?

 

[Gh0stxSinghx]

I would same there C961 Display from youtube:
But not show from 8 to 32 inch wheel size setting?

www.youtube.com/watch?v=SL174JCpf74

 

[Gh0stxSinghx]

Oh well my working 8 to 32 inch wheel size setting by endless-sphere.com forum
From menu can open advanced menu by pressing and holding (+) and (-) and pressing power 8 times.

Well My trike 20" wheel speed is 20-21mph for 8FUN Mid Drive BBS-01

 

[shemozzle999]

Hi Jatinder,

Looks like you have finally got it all sorted out.

Now you have finished your conversion could you please post some photos of the trike.

If you still have range problems why not just buy another identical 36v 8Ah battery so that you have 2.

Good find for those spare BBS01 parts.

 

[Geebee]

I would love to see a review of the BBS01 on a recumbent trike especially with a 20" wheel, as I will probably be going the same way down the track.

 

[Gh0stxSinghx]

Hi Jatinder,

Looks like you have finally got it all sorted out.

Now you have finished your conversion could you please post some photos of the trike.

If you still have range problems why not just buy another identical 36v 8Ah battery so that you have 2.

Good find for those spare BBS01 parts.

Hi Shemozzle,

I will soon post take photo on here, Not all finished by wait my bottle battery on my trike sit back.

My bottle battery 36V 8.8ah is low miles not good and broken from lock hold off fall. When all finished will ready go ride will see how long run miles for my bottle battery and BBS01 display. I would will later again buy battery 36V 11ah (Plastic Rear Rack) need more run up miles.

Great parts speed sensor extension cord with length being 30cm, buy 4pcs 120cm longer cable on my trike rear wheel well.

 

[Gh0stxSinghx]

I would love to see a review of the BBS01 on a recumbent trike especially with a 20" wheel, as I will probably be going the same way down the track.

Yeah I hope BBS01 with my KMX Trike rider and see up hill.

 

[JohnWils]

Hi all,

I get manual of C961 Display from Wheel size setting. I try open wheel size setting but not show my display for Range from 8 to 32 inch wheel size setting.

Please help how get open 8 to 32 inch my dispaly?

Well I'm happy that someone else had difficulty with this since the manual I got said hold + OR - which left me stumped until I found another manual that said hold both +AND -. While I'm on this advanced setting I also found that the power setting from 2 to 9 actually increases the power level to a staggering acceleration level - I thought this might just make a sub division of 1-3 - how wrong I was. This is quite a remarkable piece of kit and is whisper quiet.

 

[Gh0stxSinghx]

That right, No way manual wrong with Hold + OR -

 

[Gh0stxSinghx]

Good find for those spare BBS01 parts.

I was check with GBK the parts speed sensor extension cord and chain cover. this website GBK on available now.

 

[Gh0stxSinghx]

I am ride with BBS01 today feel like the bionx motor well. and great for climbing. up hills mid drive is more efficient than a hub motor when climbing.

I take photo all my KMX Trike.

 

[Gh0stxSinghx]

My KMX E-Trike of pics

 

[Geebee]

Looks like a very tidy install.
I was going to ask why have the motor on top of the boom but remembered the KMX video's I have seen of the front rings been driven into the road under brakes

 

[shemozzle999]

Hi Jatinder,

Thanks for posting the photos as promised, ditto Geebee's comments, well done.

I will be interested to hear how you get on with the bottle battery and what sort of ranges you can get with various usage.

I am still waiting for a source for the promised 52T chainwheel before I put my motor into action on a small folder.

Hi Geebee,

Jatinder has mounted the motor correctly as the body of the motor will be trying to rotate in the opposite direction to the driven chainwheel so it will be supported by the forward member ie locked hard against it but as you said it has its advantage of taking everything out of the way should you need to brake hard like the fellow in the high powered conversion I posted in the other thread.

 

[Geebee]

I prefer the look of it on the lower side, less visible, but my trikes are lower and longer meaning the back end will not lift if you brake too hard the wheels just slide.
I am hoping to get a BBS01 down the track.

 

[shemozzle999]

I just admire the way that Jatinder has single-handedly overcome all the problems along the way with his build, he has certain got my respect.

He has shown yet another application for this great little bit of kit and I have now no doubt that his efforts to prove that it can be done will be used by others to exploit it commercially. I only hope he gets the recognition he deserves for all his efforts.

 

[Gh0stxSinghx]

My very old photo mid drive motor on under of the boom. Know why with BBS01 is waterproof.

 

[Gh0stxSinghx]

I also wait the 52T chainwheel do higher speed.

 

[Gh0stxSinghx]

Hi,

Bottle Battery Parts

My Bottle Battery is broken from lock hold off fall. I try find site parts for battery. (Not bottle battery case)

I need buy pic there or got lock:




My photos show you from lock off look there:

 

[Deleted member 4366]

You can make a new piece from Epoxy and chopped up strands of fibreglass. I've already repaired one for Forum member Bezzer. If you send me the top part, I'll repair yours too if you want. No charge, only the postage.