Recent content by sefunlekite

Yes but it takes 5min to dismantle it. Nota problem

Hi sorry for late reply 350w. I believe it s plebty even for steep climb. Don t regret it

So to give an update: my bike has been built for a couple months now and I love it! It rides great. I get uphill like there s no tomorrow but still getting a proper workout by pedalling. The torque sensor is great and I really don't regret not going the bafang way. The way the bike handles with...

Any good advice on where to find a good 36v battery and charger? Any good battery builders around or on eBay? Thanks

Hello again. So I've done the math, took all dimension. I believe it will fit: - adaptor: the ones I have found have 41 oustide 35 inside and very little recess on the outside so should be ok - By shaving to 73mm the bb everything clears. The chain ring can be changed as it s standard bcd 110 so...

You re right. I will measure how much space I have at the chainstay and pivot compared to the motor diagram I manage to find. Thanks for your help

So potential problems: 1) the chain might touch the frame and suspension pivot? 2) the chain might be misaligned? 3) the motor might not fit and touch the frame? That s quite a bit. I read on an Amazon review that the tsdz2 fits into 80 mm max (is that true?) so that s 12mm to clear 6mm each...

Another thing: by reducing the BB size and thus the chainstay position versus the bike will I get a misaligned chain? Is it fixable?

Hey so back with more decision: a friend of a friend is a bike guru and doctor. He has: 1) told me the extra 1.9cm on the BB are not necessary to maintain frame integrity. It was design this way to be able to fit a bb92. 2) he can grind it no problem. He makes his own frames so it s nothing for...

You are right that s why Luna cycle sell it with a triangle to attach it to the mounts.

@doomaniac: yep I agree a smaller power engine is better. I know that industrial productions are better but it s way out of my budget. So i pull the trigger and got lucky: 2015 KTM LYCAN, it has: - 27,5 tire 2,5 width. Strong alex rims - Upgraded high quality fox performance 34 front 150mm back...

Hello Looking to convert a full suspension see here: http://www.pedelecs.co.uk/forum/threads/please-help-me-build-my-full-suspension-emtb.30096/#post-416833 So if you want to sell your gear to upgrade etc... Please let me know. The battery will have to be quite new Thanks! Stephen

Hi guys thanks for the warm welcome. Here is my talk on the subject http://www.pedelecs.co.uk/forum/threads/please-help-me-build-my-full-suspension-emtb.30096/#post-416833 Still trying to find a good solution...

Thanks guys for the helpful replies @Nealh: I get your point. As I want to use my legs (with assistance) and not the throttle I believe I got get away with 500 to 750w. This would make me save money for a better battery. Would recommend the bbs02 over the tsdz2? I believe there are reliability...