Recent content by FrTedCrilly

Thanks - will try this later …

Thanks @Nealh I tried 132 and way better - L5 assist cutting out at 23 kmh … which is fine . ( should I tweak up again to get to 25kmh ? Is there units I should be going up ? What’s does this mean for the magnets count in this hub ??? (In case others need it) thanks for the great and...

I have P1 set at 96 .. which I got from other pedals Swytch related post … this obv assumes my hub is same - it is mark II hub - model in the 1st post

Thanks for coming back … On Answers 1.was just there - verified with Waze - actually about 16.5 kmh was the assist stop speed. Ease matched LCD display. 2. Re Swytch kit assist cut out - it’s been 2- years since I had it running , and no lcd on it from memory was higher than now 3.speeds on...

Hi all - hoping for a bit of help here ... My previous post was "..alternate battery and controller options to use with Swytch" .. thanks all for help on that one. From this I purchased the following, all connected up and working. Hoping KT settings can tweak / change up the speed limit...

Before spending money on kit wanted to confirm motor working … good news it is !!! Enquired what could they fit .. basically seems to be the Yose 250 w front kit but I don’t need the motor wheel and my own switch is not limited so better …

Thanks for coming back on this. Ok I am happy to consider to source and do myself but I wouldn’t have the tech info to programme the controller for the Swytch motor , etc to get the best out of it Is there any solid guides you could recommend ? ( I have searched a fair bit) other questions...

Thanks Peter -

Hi all like many others , been left with a working Swytch front wheel following poor Swytch experience on a failed battery / controller. looking for ways to continue to use , any advice / experience welcome thanks TC