Cisco-man's latest activity
-
CCisco-man replied to the thread Swapping wheel rims.Do the build yourself and get your local bike shop to true it for you (much cheaper). There are websites with spoke length calculators...
-
CCisco-man replied to the thread Chances of marrying a Swytch front wheel with a Yose (Lishui) controller..No offence taken. You've given me a lot of help directly and indirectly in understanding pedelecs - thanks for that.
-
CCisco-man replied to the thread Chances of marrying a Swytch front wheel with a Yose (Lishui) controller..Ouch. I’ve been cuffed! I don’t think I was guilty of either in this case though. The “erroneous” display sends and receives data across...
-
CCisco-man replied to the thread Chances of marrying a Swytch front wheel with a Yose (Lishui) controller..I messaged Lily (Yose Power) about my error 9, and she advised to email their support team. I had purchased my various items such as the...
-
CIt seems we're all qualified electricians here... you're applying the rules of domestic 240v AC installation to what is, in electricians...
-
CCisco-man replied to the thread Official Statement from YOSEPOWER regarding the "Triangle Battery Recall" Post.Has ebay come up with the goods...
-
CI use marine heat shrink + self-amagamating rubber tape, to be sure. The glue could become loosened with movement or break down with...
-
CHeatshrink individual wires only, then cover the whole lot in SRV and shrink large heatshrink over the whole cable and clean off any...
-
CCisco-man replied to the thread Motor connection.I’m pretty sure Julets were never designed to have a diy option. I can recommend a squirt of a good silicon sealer (or adhesive) around...
-
CCisco-man replied to the thread Switching from swytch.That makes sense. I shall have a little play with the pas’s i’ve got. Get my compass out!
-
CCisco-man replied to the thread Switching from swytch.I’ll try the swytch pas first (with low expectation). Just waiting for my KT stuff to arrive. I’m puzzled why a magnet passing by a...
-
CI'll post a list of the parts used and the programme settings ,for anyone who wants to change from Swytch, thanks again guys. Rig the jig
-
CCisco-man replied to the thread Switching from swytch.So the chances are that C1 set to 3 will mean that the swytch pas (12 poles) will probably work - if the 12 pole that you bought is now...
-
CCisco-man replied to the thread Hub test box - worth doing?.Thanks AGS - retired systems engineer - I come well armed with the essential tools and bits!
-
CCisco-man replied to the thread Hub test box - worth doing?.Hi Saneagle. Yes, I was never intending to go the Lishui way But I had it in my spares. It’s all good learning stuff though. I’ve at...
